Create SD Image Version 0.8

WARNING: NOT Pi3 B + compatible. This image will not boot on the newest Pi 3 B+. Please use version 0.8.3

The next major release will be version 0.9

The HiveTool image for the Raspberry Pi Version 0.8.0 Release Candidate 5 is available here:

https://drive.google.com/open?id=1euXRxbtnyF7nag5jWVq1-HKezHE6CsJy

The sizes are:

hivetool080rc5.img.zip   2380977029  (2.3 GB)
hivetool080rc5.img       6585934336  (6.4 GB)

The sha1, md5 and sha256 sums of the zipped image are:

$ sha1sum hivetool080rc5.img.zip
0587f2544f525c4bcd6f70d42e5ef60acc0275d2  hivetool080rc5.img.zip

$ md5sum hivetool080rc5.img.zip
90940d4c80673e7f4fd305bff607a78d  hivetool080rc5.img.zip

$ openssl dgst -sha256 -hex hivetool080rc5.img.zip
SHA256(hivetool080rc5.img.zip)= e9c68ceb0d0dbc9912ed82d541a1aa84b54139bf3bf1498c5b67f6c4849669d3

The sha1, md5 and sha256 sums of the expanded image are:

$ sha1sum hivetool080rc5.img
efc01cdfc47fe4b00c74178e994d03e07af4c5b1  hivetool080rc5.img

$ md5sum hivetool080rc5.img
fb1ec65e4ca3a9ea0846b18af870c6e0  hivetool080rc5.img

$ openssl dgst -sha256 -hex hivetool080rc5.img
SHA256(hivetool080rc5.img)= 07322c1f94f78085888b02d8815f222cc2de2742ee6001b00abc4d992d4ae71f

Feature Request

~~Display LAN IP prominently on config (currently on status screen).~~
~~Add RTC support~~ See Real Time Clock RTC.
~~Add openOCD to talk to the BMD-301.~~ See BMD301.
~~Add MEMS digital microphone modules.~~
~~Set system timezone and time~~
Rain Gauge Add digital input and counting software for rain gauge at the hive.
~~Add Hivetool icon to desktop and start menu that will launch browser. Set browser home page to localhost.~~
Add Service Mode switch to flag bad data from hive manipulations.
~~Add support for metric/SI units.~~
Add NASA Data Download.
~~Load cell calibration wizard.~~
Fix graphing software.
Add more help pages including sensor connector pictures. Put the whole Hivetool wiki on the image?
Add comment field to beekeeper interface to annotate the data.
Data sampling engine See Change: Data Acquisition
Data reduction and compression. Change the weather updates from being downloaded to the hive computer and then uploaded to the public server to reduce the amount of data transferred when using 3G/4G communication to minimize the charges for data transfer. The beehive would send only hive data to the public server, and the public server would fetch the weather data from public sources. This would also simplify the administration when moving the hives to another location, so the client doesn’t need to be updated. In Norway it’s normal to change the location 2 times per year. Also see Change: Weather Data.
Integrate HiveControl or drop it.

Bug Fix

Auto expand image

init=/usr/lib/raspi-config/init_resize.sh
raspberrypi.stackexchange.com/questions/47773/disable-auto-file-system-expansion-in-new-jessie-image-2016-05-10
https://www.raspberrypi.org/forums/viewtopic.php?t=174434
http://blog.febo.com/wp/?p=283

fix formating in line 310 hive.sh when lux is NULL

  printf " %s  %s  %s %.2f  %.2f  %12s\n"

Change HIVETOOL_UPLOAD=YES to NO so that the IP doesn't get blacklisted before the hive is configured
Make sure ntpd is running

No! It is not installed!

sudo apt-get update
sudo apt-get -y install ntp

https://www.raspberrypi.org/forums/viewtopic.php?t=192020

PIGPIO library based sensor drivers quit working with the latest update.

How the image was created

Get latest Stretch image

Download, verify the SHA256 checksum, unzip, burn image.

Version: November 2017
Release date: 2017-11-29
Kernel version: 4.9
Release notes: Link

Verify the checksum:

$ openssl dgst -sha256 -hex 2017-11-29-raspbian-stretch.zip

SHA256(2017-11-29-raspbian-stretch.zip)= 64c4103316efe2a85fd2814f2af16313abac7d4ad68e3d95ae6709e2e894cc1b

Unzip the image

$ unzip 2017-11-29-raspbian-stretch.zip
Archive:  2017-11-29-raspbian-stretch.zip
inflating: 2017-11-29-raspbian-stretch.img

Copy it to the SD card

# dd bs=40M if=2017-11-29-raspbian-stretch.img of=/dev/sdb

Boot

Stretch boots directly into the window system.

Configure Rasbian Image

Set local, time zone, keyboard, WiFi country

Configure Start Menu -> Preferences-> Raspberry Pi Configuration

Localisation:

Set Local

Language      -> English (default)
Country       -> US 
Character Set -> UTF-8  (default)
OK

Set Time Zone

Area     -> US
Location -> Eastern
OK

Set Keyboard

Country  ->  United States
Variant  ->  English (US)
OK

Set WiFi Country

Country  -> US
OK

OK
Reboot Needed Reboot Now -> Yes

Configure Interfaces

Start Menu -> Preferences-> Raspberry Pi Configuration -> Interfaces

Camera         ON
SSH            ON
VNC           OFF   Turn this off as it conflicts with xRDP
SPI            ON
I2C            ON
Serial         ON    Causes Clock Not Found error on boot but need it on for serial console?
1-Wire        OFF    Causes Hive Interface Board LED to flash in bursts
Remote GPIO   OFF

Set up Wi-Fi

1. Add your network information to /etc/wpa_supplicant/wpa_supplicant.conf. For an unencrypted open network with an ESSID of dlink:

vi /etc/wpa_supplicant/wpa_supplicant.conf

network={
ssid="dlink"
key_mgmt=NONE

auth_alg=OPEN }

Update, upgrade

update your system's package list and then upgrade all your installed packages to their latest versions:

sudo apt-get update
sudo apt-get dist-upgrade

DO NOT USE rpi-update.

It may be for Whezzy, not Stretch and will break the GPIO.  It installs bleeding edge
alpha or beta firmware and will break the GPIO.

Remove packages we don't need

sudo apt-get remove --purge penguinspuzzle scratch dillo squeak-vm squeak-plugins-scratch sonic-pi netsurf-gtk netsurf-common
sudo apt-get autoremove
sudo apt-get clean
rm -rf /home/pi/python_games
sudo rm -rf /opt/minecraft-pi

https://project.altservice.com/issues/418 NO! Don't do this if you want to use the video camera: sudo rm -rf /opt/vc

Install packages we need

sudo apt-get -y install gawk bc apache2 libusb-dev libgd-graph-perl libexpat1-dev sqlite3
sudo apt-get install dh-autoreconf libudev-dev libusb-1

pi@raspberrypi:~ $  sudo apt-get install dh-autoreconf libudev-dev libusb-1
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package libusb-1

Oops. What happened to libusb-1? Hope it is not needed ... OK, We'll go on without it ...

sudo apt-get install dh-autoreconf libudev-dev

Install perl modules

**********************************************************************
***         CGI.pm HAS BEEN REMOVED FROM THE PERL CORE!!            ***
**********************************************************************
sudo cpan GD::Text GD::Graph Date::Format XML::Simple DBI DBD::SQLite
sudo cpan CGI

**********************************************************************
***    Is it still necessary to use apt-get instead of cpan?       ***
*** This was done because installing DatTime with cpan didn't work ***
***      I think it didn't install all the dependencies.           ***
**********************************************************************

Install perl DateTime module

apt-get install libdatetime-perl

Install HiveTool software

Create downloads directory owned by user pi

sudo mkdir /home/downloads
sudo chown pi:pi /home/downloads

Create symbolic links to the hivetool log files:

sudo ln -s /home/hivetool/hivetool_raw.db /var/www/html
sudo ln -s /home/hivetool/hive.conf /var/www/html
sudo ln -s /home/hivetool/hivetool.log /var/www/html
sudo ln -s /tmp/hive.xml /var/www/html

Patch perl module GD::Graph

It appears this has finally been fixed as it is working without doing the step. YES!

The Perl Module, GD::Graph needs a patch to correctly draw a graph with two y axes. Note that the target directory changes with each new perl version. This time it is 5.20.2. Copy the patched file to it's proper location:

sudo cp /home/downloads/axestype.pm /usr/local/share/perl/5.20.2/GD/Graph/

Web Server

Configure apache

Link the cgi.load and include.load module to mods-enabled
ln -s /etc/apache2/mods-available/cgi.load /etc/apache2/mods-enabled

ln -s /etc/apache2/mods-available/include.load /etc/apache2/mods-enabled
Add .pl to AddHandler cgi-script
sudo vi /etc/apache2/mods-enabled/mime.conf

uncomment #AddHandler cgi-script .cgi (around line 219) and add .pl so it looks like:

AddHandler cgi-script .cgi .pl
add Includes and +ExecCGI to Options:
sudo vi /etc/apache2/apache2.conf

In stanza <Directory /var/www/>

change

Options Indexes FollowSymLinks

to

Options Indexes FollowSymLinks Includes ExecCGI
Add index.shtml to DirectoryIndex:
sudo vi /etc/apache2/mods-enabled/dir.conf

Change

DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm

to

DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm index.shtml
Set up apache to listen on port 8080 if using port forwarding:
sudo vi /etc/apache2/ports.conf

add Listen 8080
Restart Apache

sudo apachectl restart   or      sudo/etc/rc4.d/S02apache2 restart

Set sudo user privileges for Apache

This is necessary to allow config.pl to read the sensors. Run visudo to edit the sudo config file:

sudo visudo

and insert these line in the "User privilege specification" section:

# User privilege specification
root    ALL=(ALL:ALL) ALL
www-data ALL=NOPASSWD: /home/hivetool/hive.sh
www-data ALL=NOPASSWD: /home/hivetool/hx711pyB.sh, /home/hivetool/hx711.sh, /home/hivetool/hx711b.sh
www-data ALL=NOPASSWD: /home/hivetool/HX711a128.py, /home/hivetool/hx711py.sh
www-data ALL=NOPASSWD: /home/hivetool/dht22_adafruit.sh
www-data ALL=NOPASSWD: /usr/bin/nice
www-data ALL=NOPASSWD: /home/hivetool/temperhum.sh
www-data ALL=NOPASSWD: /usr/local/bin/2591, /usr/local/bin/2561
www-data ALL=NOPASSWD: /usr/local/bin/hx711, /usr/local/bin/hx711wp_chanB, /usr/local/bin/AdafruitDHT.py, /usr/local/bin/Seeed_DHT22

Create SQLite database

cd /home/hivetool
sqlite3 hivetool_raw.db
sqlite> .read create_hivetool_sqlite.sql
sqlite> .quit

Make it writable or config.pl will fail to save to the database.

sudo chmod a+w /home/hivetool/hivetool_raw.db
sudo chmod a+w /home/hivetool

Create a symbolic link to /home/hivetool/hivetool_raw.db from /var/www/html so hive_stats.pl and hive_graphX.pl can access the database:

sudo ln -s /home/hivetool/hivetool_raw.db /var/www/html/

phpLiteAdmin ver 1.9.7.1

Install SQLite database administration tools. Download zipped file from

https://www.phpliteadmin.org/download/

and save in /home/downloads.

Unzip and move the php files to/var/www/html/admin

unzip phpLiteAdmin_v1-9-7-1.zip
sudo mkdir /var/www/html/admin
sudo mv *.php /var/www/html/admin

This is broken in Stretch - php5 has(finally) been replaced with php7 - enhanced performance: faster, less memory and security flaws fixed. Now, to see if SQLite will work with it ...YES! All is good.

sudo apt install php7.0 php7.0-cli
apt-get install php-sqlite3

https://www.raspberrypi.org/forums/viewtopic.php?t=191838 https://askubuntu.com/questions/792116/whats-the-difference-between-the-php7-0-sqlite-and-php-sqlite3-packages

Configure phpliteadmin

cd /var/www/html/htadmin/
sudo cp phpliteadmin.config.sample.php phpliteadmin.config.php
vi phpliteadmin.config.php

change

$directory = '.';

to

$directory = '..';

Install TEMPerHUM software

sudo apt-get update
sudo apt-get install dh-autoreconf libudev-dev libusb-1.0-0-dev cmake-curses-gui

cd /home/downloads
sudo git clone git://github.com/signal11/hidapi
cd hidapi
sudo ./bootstrap
sudo ./configure
sudo make
sudo make install

cd ..

#sudo git clone git://github.com/edorfaus/TEMPered
#cd TEMPered

#sudo git clone https://github.com/rcrum003/TEMPered-v6-2015
#cd TEMPered-v6-2015

Note: For TEMPered-v6-2015 in ccmake set

HIDAPI_HEADER_DIR                /usr/local/include/hidapi
HIDAPI_LIB                       /usr/local/lib/libhidapi-hidraw.so

git clone git://github.com/mushisushi/TEMPered/

sudo ccmake .

Then the sub commands: "c" to configure then "g" to save and go

sudo make
sudo make install

Add /usr/local/lib/arm-linux-gnueabihf/ to /etc/ld.so.conf

sudo vi /etc/ld.so.conf

So it looks like this:

include /etc/ld.so.conf.d/*.conf
/usr/local/lib/arm-linux-gnueabihf/

Run ldconfig to pick up the new libraries

sudo ldconfig

Install Broadcom 2835 Library ver 1.5

Download the bcm2835 library and save it in /home/downloads http://www.airspayce.com/mikem/bcm2835/bcm2835-1.52.tar.gz

extract the tarball, compile and install it:

cd /home/downloads
tar xvfz bcm2835-1.5.tar.gz
cd bcm2835-1.52
./configure
make
sudo make check
sudo make install

Install wiringPi library ver 2.32

get wiringPi code from github and compile it
cd /home/downloads

git clone git://git.drogon.net/wiringPi

cd wiringPi

./build
Test
gpio -v

gpio readall

gpio -v
gpio version: 2.44
Copyright (c) 2012-2017 Gordon Henderson

http://wiringpi.com/download-and-install/

DHT22 Temperature/Humidity Sensor

Groove Seeed - DHT22 with modified code. Note that the code has been modified to return the temperature and humidity in floating point instead of having to divide it by 10, and a few other "improvements".

Install wiringPi libraries
Get the DHT22 software
cd /home/downloads

sudo git clone https://github.com/Seeed-Studio/Grove-RaspberryPi.git

cd Grove-RaspberryPi/Grove\ -\ Temperature\ and\ Humidity\ Sensor\ Pro

make

sudo cp Seeed_DHT22 /usr/local/bin

Python DHT22 code from Adafruit

*** sudo apt-get install python-dev *** NOT NECESSARY ALREADY INSTALLED ***
cd /home/downloads
git clone https://github.com/adafruit/Adafruit_Python_DHT.git
cd Adafruit_Python_DHT
sudo python setup.py install
cd examples
python AdafruitDHT.py

DHTxx Temperature/Humidity Sensor

This code uses the PiGPIO libraries (pigpiod).

Download the DHT11/21/22/33/44 Sensor code from http://abyz.co.uk/rpi/pigpio/code/DHTXXD.zip
Unzip
compile

Note that this code uses the Broadcom GPIO numbering so Ras Pi GPIO 2 <=> Broadcom GPIO 27 Ras Pi GPIO 3 <=> Broadcom GPIO 22

HX711 weight ADC

hx711wp

Note: The original hx711 code has been modified to use the wiringPi library and a bug fixed.

Download the software from gitHub
cd /home/downloads

sudo git clone https://github.com/ggurov/hx711
replace hx711.c with hx711wp.c and add locking.h
compile
gcc -o hx711wp hx711wp.c -lwiringPi
Copy hx711 command to /usr/local/bin:
sudo cp hx711wp /usr/local/bin/hx711
To read the battery voltage, copy hx711wp_chanB command to /usr/local/bin:
sudo cp hx711wp_chanB /usr/local/bin/hx711wp_chanB

TLS2591 Lux Sensor

2591 Adafruit with modified code.

-rw-r--r-- 1 root root 10439 Aug  3 01:36 2591a.cpp
-rw-r--r-- 1 root root  3303 Aug  3 01:36 2591a.h
-rw-r--r-- 1 root root  1509 Aug  3 01:36 2591_pi_2.cpp

gcc 2591_pi_2.cpp 2591a.cpp -lwiringPi -o 2591 
cp 2591 /usr/local/bin

Add crontab entries

Edit crontab:

sudo crontab -e

Add to crontab:

#
# ### Start of Hivetool crontab entries ###
#
# start PIGPIO daemon on boot 
@reboot /usr/local/bin/pigpiod
# 
# start Data Acquisition Daemon on boot
@reboot /home/hivetool/dad7.sh
#
# Check hive instruments every 5 minutes. Kill process after 3 1/2 minutes.
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 3.5m /home/hivetool/hive.sh >/dev/null 2>&1
#
# Check the server status. Kill process after 1 minute.
4,9,14,19,24,29,34,39,44,49,54,59 * * * * timeout -s KILL 1m /home/hivetool/server_status.sh > /var/www/html/server_status.txt
#
# Reset the rain gauge at midnight
1 0 * * * timeout -s KILL 1m /home/hivetool/rain_reset.sh
#
# ### End of HiveTool crontab entries ###
#

Video

Install VLC media software. Note that for the camera to work, it must be enabled by running raspi-config.

sudo apt-get install vlc

To automatically start the video streaming using Real Time Streaming Protocol to port 8554, add to /etc/rc.local

# start video stream
su pi /home/hivetool/stream_video.sh

/home/hivetool/stream_video.sh should be:

raspivid -n -o - -t 0 -w 800 -h 400 -fps 24 |cvlc -vvv stream:///dev/stdin --sout '#rtp{sdp=rtsp://:8554}' :demux=h264

This method uses raspivid to streams video from the PiCam to vlc where is can be accessed with videoLAN, a free and open souce media player for Apple, Linux, Microsoft platforms at port 8554 using RTSP://hive.ip:8554

Access Point

sudo apt-get install hostapd isc-dhcp-server

https://learn.adafruit.com/setting-up-a-raspberry-pi-as-a-wifi-access-point/install-software

gEDA Schematic/PCB layout software

Install the Electronic Design Automation tools

sudo apt-get update
sudo apt-get install geda
sudo apt-get install pcb
sudo apt-get install gerbv

In /home/pi/.gEDA create /home/pi/.gEDA/gschem

vi /home/pi/.gEDA/gschem

and add the following line

(component-library "/home/hardware/symbols")

Copy the schematics and PCB layouts to /home/hardware.

xrdp

NO! Don't uninstall VNC, just turn it off in the configuration

Configure Start Menu -> Preferences-> Raspberry Pi Configuration -> Interfaces

~~uninstall RealVNC (This is a work around as now realvnc-vnc-server comes installed and breaks xrdp. xrdp is currently favored over realvnc as xrdp works with Microsoft Windows.)~~

~~uninstall RealVNC and install xrdp~~

~~apt-get purge realvnc-vnc-server~~

Install xrdp for Adrian and all the Micro$oft users:

sudo apt-get install xrdp

fix mouse pointer. Create /home/pi/.xsessionrc

vi /home/pi/.xsessionrc

and add this line:

xsetroot -cursor_name left_ptr&

http://raspberrypi.stackexchange.com/questions/56413/error-problem-connecting-to-raspberry-pi-3-with-xrdp

open62541

sudo git clone git://github.com/open62541/open62541
# ### sudo apt-get install git build-essential gcc pkg-config cmake python python-lxml
sudo apt-get install cmake cmake-data python-lxml
# enable additional features
sudo apt-get install libexpat1-dev # for XML-encodingi  ### already done
sudo apt-get install liburcu-dev # for multithreading
sudo apt-get install check # for unit tests
sudo apt-get install graphviz doxygen # for documentation generation 
sudo apt-get install cmake-curses-gui

sudo cd open62541
sudo mkdir build
sudo cd build
sudo cmake ..
sudo make

# select additional features
sudo ccmake .. # enter g to build and exit
sudo make

Install touchscreen pop up keyboard support

sudo apt-get install matchbox

Install MEMS microphone I2S support

sudo apt-get install raspberrypi-kernel-headers
cd /home/downloads
git clone https://github.com/skakri/asoc-i2s-loader
cd asoc-i2s-loader
make
... to be continued ...

in /boot/config.txt

# Uncomment to enable I2S MEMs microphone 6-9-16 AO
dtparam=i2s=on

in /sys/kernel/debug/asoc/platforms get the platform and device name. Change in the asoc-i2s-loader.c

3f203000.i2s
snd-soc-dummy

in /etc/modprobe.d/raspi-blacklist.conf

blacklist snd_soc_wm8804
blacklist snd_soc_pcm512x
blacklist snd_soc_tas5713

To record:

arecord -D hw:0 -c2 -r 48000 -f S32_LE -t wav -v file.wav

Install RTC support

Edit /boot/config.txt. Add:

#enable RTC DS3231 module
dtoverlay=i2c-rtc,ds3231

Edit /lib/udev/hwclock-set and comment out these three lines:

#if [ -e /run/systemd/system ] ; then
# exit 0
#fi

Install openOCD

sudo apt-get install git autoconf libtool make pkg-config libusb-1.0-0 libusb-1.0-0-dev
git clone git://git.code.sf.net/p/openocd/code openocd-code
cd openocd-code
./bootstrap
./configure --enable-sysfsgpio --enable-bcm2835gpio
make
sudo make install

Set GPU memory

Set GPU_MEM, GPU_MEM_256, GPU_MEM_512, and GPU_MEM_1024 for different Pi models in config.txt. Maybe:

GPU_MEM=64
GPU_MEM_256=64
GPU_MEM_512=128
GPU_MEM_1024=256

Install Desktop Background and Icons

Copy the HiveTool icons to /usr/share/icons/hicolor/XXxXX/apps/

cd /home/downloads/icons
./icon.sh

cd  /home/pi/Desktop/

Write Image

Copy the image to another computer:

1. Remove the SD card from the Pi and on another computer, copy the image to a file:

dd bs=4M if=/dev/sdb of=/home/downloads/hivetool080rc2.img

2a. Shrink the image http://sirlagz.net/2013/03/10/script-automatic-rpi-image-downsizer/

./autosizer.sh hivetool080rc2.img

2b. Or use this script to shrink the image and make it expand on initial boot:

https://raw.githubusercontent.com/Drewsif/PiShrink/master/pishrink.sh

3. Compress the image using zip:

zip hivetool080rc2.img.zip hivetool080rc2.img

bash-4.2# dd bs=40M  if=/dev/sdb of=/home/downloads/hivetool074.img
 379+1 records in
 379+1 records out
 15931539456 bytes (16 GB) copied, 596.492 s, 26.7 MB/s

# ./autosizer.sh hivetool080rc2.img
partinfo BYT; /home/downloads  /hivetool080rc2.img:15931539456B:file:512:512:msdos::;1:4194304B:47737343B:43543040B:fat32::lba;2:48234496B:15931539455B:15883304960B:ext4::;
partnumber 2
partstart 48234496
loopback /dev/loop0
e2fsck 1.42.12 (29-Aug-2014)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
rootfs: 197120/957712 files (0.2% non-contiguous), 1406114/3877760 blocks
resize2fs 1.42.12 (29-Aug-2014)
minsize 1599497
minsize plus 10 1600497
resize2fs 1.42.12 (29-Aug-2014)
Resizing the filesystem on /dev/loop0 to 1600497 (4k) blocks.
Begin pass 2 (max = 68187)
Relocating blocks             XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Begin pass 3 (max = 119)
Scanning inode table          XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Begin pass 4 (max = 22883)
Updating inode references     XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
The filesystem on /dev/loop0 is now 1600497 (4k) blocks long.

# zip hivetool080rc2.img.zip hivetool080rc2.img
  adding: hivetool080rc2.img (deflated 65%)

bash-4.2# md5sum hivetool074.img.zip 
 7cdca1e73a5d81e3c70909961c6ea4b9  hivetool074.img.zip

bash-4.2# sha1sum hivetool074.img.zip 
 ff504657257fdf13905a1ad24fd2f2eab5af1562  hivetool074.img.zip
 
$ md5sum hivetool074.img
 2e26e8f266870cebcd51bf365d861559  hivetool074.img

$ sha1sum hivetool074.img
 c855c8c1175866bd52ed8143490d320011323108  hivetool074.img

$ ls -l hivetool080*
-rw-r--r-- 1 root root 6603870720 Dec 23 16:54 hivetool080rc2.img
-rw-r--r-- 1 root root 2340360521 Dec 23 17:11 hivetool080rc2.img.zip