Create SD Image 0.7.3

This page describes how the bootable Raspian-HiveTool image was created. This is for information only. The easiest and best way to install Hivetool is to download the latest image.

Bug Fixes

replace hx711 and dth22 code with fixed versions.
add export LC_NUMERIC="en_US.UTF-8" to hive.sh
don't remove python tools when removing bloatware. Keep: wolfram-engine - a scientific platform, Idle and Idle3 - python language editors

Feature Request

0.73

add Ryans Hive Controller code
add xrdp, open62541 packages
add Data Acquisition Daemon (DAD) code

Dad supports battery voltage monitoring and the rain gauge.

0.72

Done Test most recent raspbian distro Jessie (4.1 Kernel)
Done Removal of bloatware from Raspbian (games, educational, etc.)
Done Hivetool Support Pi & Pi2 (auto detect preferred)
Automatic removal of erroneous data from sensors
Done Basic navigation from webserver index.html, especially config.pl and Hivestats with download.
Menu driven selection & configuration of sensors (gpio 2,3 for DHT22s preassigned by menu default)
Menu driven setup of essential parameters with choices that don't crash app when saving, grey out unused.
Done Sensor calibration provisions (gain, offset)
Display instantaneous sensor readings from config screen with read button
Preload & configure Apache Webserver and database, Hivetool, sensor drivers for proven sensors.
Update local & online hivestats graphs to display lux trend pen, (use latest hivestats with enhanced autoscaling for local)
Network / wifi support out of the box seems to work well now, handle configuration on router side with DHCP reservation as may be needed.
Add configuration menu item for naming pi, same as hivestats name?
Minimize need to enter Raspiconfig, can timezone and time all be handled in hivetool config?
Done Enable i2c & serial.

How the image was created

Get latest Jessie image

Download, verify the SHA-1 checksum, unzip, burn image.

Verify the checksum:

sha1sum 2016-02-09-raspbian-jessie.zip
da329713833e0785ffd94796304b7348803381db

Unzip the image and copy it to the SD card

unzip 2015-02-09-raspbian-jessie.zip
dd bs=4M if=2016-02-09-raspbian-jessie.img of=/dev/mmcblk0

Boot Jessie boots directly into the window system. There is now a GUI to Menu -> Preferences->Raspberry Pi Configuration DO NOT EXPAND file system!

Set up Wi-Fi

1. Add your network information to /etc/wpa_supplicant/wpa_supplicant.conf. For an unencrypted open network with an ESSID of dlink:

vi /etc/wpa_supplicant/wpa_supplicant.conf
                                                                                                                                                                               
network={                                                                                                                                                                           
       ssid="dlink"                                                                                                                                                                
       key_mgmt=NONE                                                                                                                                                               
       auth_alg=OPEN                                                                                                                                                               
}

2. Wi-Fi auto reconnect to AP

Go to /etc/ifplugd/action.d/ and copy the ifupdown file to ifupdown.org

cp /etc/ifplugd/action.d/ifupdown /etc/ifplugd/action.d/ifupdown.org

Then copy the ifupdown.sh script provided with wpa supplicant to /etc/ifplugd/action.d/

cp /etc/wpa_supplicant/ifupdown.sh  /etc/ifplugd/action.d/ifupdown

http://raspberrypi.stackexchange.com/questions/4120/how-to-automatically-reconnect-wifi

Remove packages we don't need

This will make room for software without expanding the image.

sudo apt-get remove --purge penguinspuzzle scratch dillo squeak-vm squeak-plugins-scratch sonic-pi netsurf-gtk netsurf-common
sudo apt-get autoremove
sudo apt-get clean
rm -rf /home/pi/python_games
sudo rm -rf /opt/minecraft-pi

https://project.altservice.com/issues/418 NO! Don't do this if you want to use the video camera: sudo rm -rf /opt/vc

Update, upgrade

Update the GPU firmware

sudo apt-get install rpi-update
sudo rpi-update

Update the package list and then upgrade the Debian packages (CPU) (includes firmware)

sudo apt-get -y update
sudo apt-get upgrade

Install packages we need

sudo apt-get -y install gawk bc apache2 libusb-dev libgd-graph-perl libexpat1-dev sqlite3
sudo apt-get install dh-autoreconf libudev-dev libusb-1

Install HiveTool software

Create symbolic links to the hivetool log files:

sudo ln -s /home/hivetool/hivetool_raw.db /var/www/html
sudo ln -s /home/hivetool/hive.conf /var/www/html
sudo ln -s /home/hivetool/hivetool.log /var/www/html

Patch perl module GD::Graph

The Perl Module, GD::Graph needs a patch to correctly draw a graph with two y axes. Note that the target directory changes with each new perl version. This time it is 5.20.2. Copy the patched file to it's proper location:

sudo cp /home/downloads/axestype.pm /usr/local/share/perl/5.20.2/GD/Graph/

Web Server

Configure apache

Link the cgi.load and include.load module to mods-enabled
ln -s /etc/apache2/mods-available/cgi.load /etc/apache2/mods-enabled

ln -s /etc/apache2/mods-available/include.load /etc/apache2/mods-enabled
Add .pl to AddHandler cgi-script
sudo vi /etc/apache2/mods-enabled/mime.conf

uncomment #AddHandler cgi-script .cgi (around line 219) and add .pl so it looks like:

AddHandler cgi-script .cgi .pl
add Includes and +ExecCGI to Options:
sudo vi /etc/apache2/apache2.conf

In stanza <Directory /var/www/>

change

Options Indexes FollowSymLinks

to

Options Indexes FollowSymLinks Includes ExecCGI
Add index.shtml to DirectoryIndex:
sudo vi /etc/apache2/mods-enabled/dir.conf

Change

DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm

to

DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm index.shtml
Set up apache to listen on port 8080 if using port forwarding:
sudo vi /etc/apache2/ports.conf

add Listen 8080
Restart Apache

sudo apachectl restart   or      sudo/etc/rc4.d/S02apache2 restart

Set sudo user privileges for Apache

This is necessary to allow config.pl to read the sensors. Run visudo to edit the sudo config file:

sudo visudo

and insert this line in the "User privilege specification" section:

www-data ALL=NOPASSWD: /usr/local/bin/2591, /usr/bin/nice, /home/hivetool/temperhum.sh, /usr/local/bin/hx711, /usr/local/bin/Seeed_DHT22

Create SQLite database

cd /home/hivetool
sqlite3 hivetool_raw.db
sqlite> .read create_hivetool_sqlite.sql
sqlite> .quit

Make it writable or config.pl will fail to save to the database.

sudo chmod a+w /home/hivetool/hivetool_raw.db
sudo chmod a+w /home/hivetool

Create a symbolic link to /home/hivetool/hivetool_raw.db from /var/www/html so hive_stats.pl and hive_graphX.pl can access the database:

sudo ln -s /home/hivetool/hivetool_raw.db /var/www/html/

phpLiteAdmin

Install SQLite database administration tools.

sudo apt-get install php5 php5-sqlite
cd /var/www/html
sudo mkdir admin
cd admin
sudo wget https://bitbucket.org/phpliteadmin/public/downloads/phpliteAdmin_v1-9-5.zip
sudo unzip phpliteAdmin_v1-9-5.zip

http://www.raspitux.de/en/using-phpliteadmin-with-raspberry-pi/#respond

sudo cp phpliteadmin.config.sample.php phpliteadmin.config.php
vi phpliteadmin.config.php

change

$directory = '.';

to

$directory = '..';

Install TEMPerHUM software

sudo apt-get update
sudo apt-get install dh-autoreconf libudev-dev libusb-1.0-0-dev cmake-curses-gui

cd /home/downloads
sudo git clone git://github.com/signal11/hidapi
cd hidapi
sudo ./bootstrap
sudo ./configure
sudo make
sudo make install

cd ..

#sudo git clone git://github.com/edorfaus/TEMPered
#cd TEMPered

#sudo git clone https://github.com/rcrum003/TEMPered-v6-2015
#cd TEMPered-v6-2015

git clone git://github.com/mushisushi/TEMPered/

sudo ccmake .

Then the sub commands: "c" to configure then "g" to save and go

sudo make
sudo make install

Add /usr/local/lib/arm-linux-gnueabihf/ to /etc/ld.so.conf

sudo vi /etc/ld.so.conf

So it looks like this:

include /etc/ld.so.conf.d/*.conf
/usr/local/lib/arm-linux-gnueabihf/

Run ldconfig to pick up the new libraries

sudo ldconfig

Install Broadcom 2835 Library

Download and install the bcm2835 library:

cd /home/downloads
curl -o bcm2835-1.42.tar.gz http://www.airspayce.com/mikem/bcm2835/bcm2835-1.42.tar.gz
tar xvf bcm2835-1.42.tar.gz
cd bcm2835-1.42
./configure
make
sudo make check
sudo make install

http://www.airspayce.com/mikem/bcm2835/

Install i2c support

Install i2c tools
apt-get install i2c-tools
run raspi-config and turn on i2c

Install wiringPi library

get wiringPi code from github and compile it
cd /home/downloads

git clone git://git.drogon.net/wiringPi

cd wiringPi

./build
Test
gpio -v

gpio readall

http://wiringpi.com/download-and-install/

DHT22 Temperature/Humidity Sensor

Groove Seeed - DHT22 with modified code. Note that the code has been modified to return the temperature and humidity in floating point instead of having to divide it by 10, and a few other "improvements".

Install wiringPi libraries
Get the DHT22 software
cd /home/downloads

sudo git clone https://github.com/Seeed-Studio/Grove-RaspberryPi.git

cd Grove-RaspberryPi/Grove\ -\ Temperature\ and\ Humidity\ Sensor\ Pro

make

sudo cp Seeed_DHT22 /usr/local/bin

HX711 weight ADC

hx711wp

Note: The original hx711 code has been modified to use the wiringPi library and a bug fixed.

Download the software from gitHub
cd /home/downloads

sudo git clone https://github.com/ggurov/hx711
replace hx711.c with hx711wp.c and add locking.h
compile
gcc -o hx711wp hx711wp.c -lwiringPi
Copy hx711 command to /usr/local/bin:
sudo cp hx711wp /usr/local/bin/hx711

TLS2591 Lux Sensor

2591 Adafruit with modified code.

-rw-r--r-- 1 root root 10439 Aug  3 01:36 2591a.cpp
-rw-r--r-- 1 root root  3303 Aug  3 01:36 2591a.h
-rw-r--r-- 1 root root  1509 Aug  3 01:36 2591_pi_2.cpp

gcc 2591_pi_2.cpp 2591a.cpp -lwiringPi -o 2591 
cp 2591 /usr/local/bin

Add crontab entries

Edit crontab:

sudo crontab -e

Add to crontab:

# Check hive instruments every 5 minutes. Kill process after 3 1/2 minutes.
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 3.5m /home/hivetool/hive.sh
#
# Check the server status. Kill process after 1 minute.
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 1m /home/hivetool/server_status.sh > /var/www/server_status.txt

Video

Install VLC media software. Note that for the camera to work, it must be enabled by running raspi-config.

apt-get install vlc

To automatically start the video streaming using Real Time Streaming Protocol to port 8554, add to /etc/rc.local

# start video stream
su pi /home/hivetool/stream_video.sh

/home/hivetool/stream_video.sh should be:

raspivid -n -o - -t 0 -w 800 -h 400 -fps 24 |cvlc -vvv stream:///dev/stdin --sout '#rtp{sdp=rtsp://:8554}' :demux=h264

This method uses raspivid to streams video from the PiCam to vlc where is can be accessed with videoLAN, a free and open souce media player for Apple, Linux, Microsoft platforms at port 8554 using RTSP://hive.ip:8554

Access Point

apt-get install hostapd isc-dhcp-server

https://learn.adafruit.com/setting-up-a-raspberry-pi-as-a-wifi-access-point/install-software

gEDA Schematic/PCB layout software

sudo apt-get update
sudo apt-get install geda
sudo apt-get install pcb
sudo apt-get install gerbv
sudo apt-get install zip

xrdp

sudo apt-get install xrdp

open62541

sudo git clone git://github.com/open62541/open62541
# ### sudo apt-get install git build-essential gcc pkg-config cmake python python-lxml
sudo apt-get install cmake cmake-data python-lxml
# enable additional features
sudo apt-get install libexpat1-dev # for XML-encodingi  ### already done
sudo apt-get install liburcu-dev # for multithreading
sudo apt-get install check # for unit tests
sudo apt-get install graphviz doxygen # for documentation generation 

sudo cd open62541
sudo mkdir build
sudo cd build
sudo cmake ..
sudo make

# select additional features
sudo ccmake .. # enter g to build and exit
sudo make

Install touchscreen pop up keyboard support

sudo apt-get install matchbox

Install Hivecontrol

Download
Unzip in /home/hivetool2.
Copy /home/hivetool2/www/public_html/ files to /var/www/html/hivecontrol
Set up virtual host on port 81
Add path to phpSQLiteadmin to database file.

hive-data.db -> /home/HiveControl-master/data/hive-data.db

This may not be right, should link to /home/hivetool2?

Install Desktop Background and Icons

Write Image

Copy the image to another computer:

1. Remove the SD card from the Pi and on another computer, copy the image to a file:

dd bs=4M if=/dev/sdb of=/home/downloads/hivetool073.img

2. Shrink the image:

http://sirlagz.net/2013/03/10/script-automatic-rpi-image-downsizer/

3. Compress the image using zip:

zip 2016-02-09-raspbian-hivetool.zip hivetool073.img