Installation

Before installing, please test the unit by powering it up and connecting it to the internet.

1. Plug the 4 pin round connector from the  Weatherproof Electronics Enclosure into the connector in the bottom of the scale base.
2. Install 6 AA batteries in the battery holder inside the Weatherproof Electronics Enclosure.
3. Plug the ethernet cable from the Weatherproof Electronics Enclosure into the POE injector receptacle marked POWER+DATA OUT:
4. Plug a cable from the POE injector marked LAN IN to a router with DHCP enabled.
5. Plug the 48 volt DC power supply into the connector on the POE Injector marked DC 4