Talk:Sensors: DS18B20

From HiveTool

Revision as of 18:20, 6 January 2019 by Paul (talk | contribs) (Created page with "Start with this short description of the commands: https://pinout.xyz/pinout/1_wire# For the Hive Interface Board 0.3 in the file /boot/config.txt you will need: dtoverlay=w...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Start with this short description of the commands: https://pinout.xyz/pinout/1_wire#

For the Hive Interface Board 0.3 in the file /boot/config.txt you will need:

dtoverlay=w1-gpio,gpiopin=17 This starts a 1-wire bus on the specified pin (17). Then the rest of the command should work.

If not, then need to turn on the pull up for GPIO 17.

Retrieved from "http://18.212.38.72/index.php?title=Talk:Sensors:_DS18B20&oldid=3937"