Talk:XXX: Load Hivetool on the Pi

From HiveTool
Revision as of 18:55, 27 December 2015 by Paul (talk | contribs)
Jump to: navigation, search

CHANGE: 6. Set the Ethernet parameters and DNS servers

FROM: To set a static IP if needed for port forwarding through the firewall. set static ip for port forwarding sudo vi /etc/network/interfaces: iface eth0 inet dhcp iface eth0 inet static address 192.168.254.31 netmask 255.255.255.0 gateway 192.168.254.254 Set the dns Servers /etc/network/interfaces /etc/dhcp/dhclient.conf

TO: At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup

interface eth0 static ip_address=192.168.254.31/24 static routers=192.168.254.254 static domain_name_servers=192.168.254.254 8.8.8.8

From https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=124423

Retrieved from "http://18.212.38.72/index.php?title=Talk:XXX:_Load_Hivetool_on_the_Pi&oldid=2110"