User:David

From HiveTool
Revision as of 23:49, 18 December 2016 by David (talk | contribs)
Jump to: navigation, search

INTRODUCTION:
My name is David Hawa, I am hobbyist beekeeper in Texas and have been keeping bees since 2012. The HawaUbee Apiary is registered with the State of Texas (#1-439-701) and is located in Roanoke Texas at Henrietta Creek Apple Orchard. The orchard which has been in operation since 1990, hosts field trips to thousands of children annually teaching them about pollinators and pollinator habitats. Currently the apiary has two monitored beehives, the first Named: HawaUbee which utilizes an older version of HiveTool and is a 10 frame Langstroth style hive. The HawaUbee hive is a participant in the NASA pollination project; the first of its kind in Texas. The second, more recent hive named HawaUbee02 is equipped with the new user friendly HiveTool setup (HiveTool 0.7.3)and monitors not only weight but internal hive temperature, external temperature, and sunlight patterns. The HawaUbee02 beehive is an 8 frame Flow Hive with dual brood boxes. My development scale is Named: HawaUbee03 which resides on my desk and it serves as my tinkering system. At the end of 2016 I currently have ten, ten-frame Langstroth beehives and I manage 5 Flow Hives that are owned by the orchard. I am amazed how far this project has come and excited to see where it is going!

The HawaUbee webpage is located at HawaUbee.com


Pictured below the HawaUbee Apiary at the close of 2016:

Panoramic Overview of the HawaUbee Apiary

SYSTEM
Overview - The HawaUbee Hivetool System is totally off the grid; it is powered by two 185W; 5.17AMP solar panels which charge Three 35AMP hour batteries and is wired with an inline fuse incase anything goes haywire. Each scale is run by separate raspberry Pi computer systems contained in individual Pellican water-tight storage boxes. The entire system is enclosed in a small outdoor storage shed which is anchored to the ground to prevent tipping. The scales under HawaUbee and HawaUbee02 are constructed out of stainless steel "L" angle. Wires from the load cells are run into a watertight junction box and then are run through a protective conduit and connect to the Pi computer systems. Both Pi systems have wireless USB dongles that connect to an AT&T velocity hotspot.
HiveTool Scale: HawaUbee


HiveTool Scale: HawaUbee02



Parts List
Upcoming

Soldering/Construction Manual
If you have decided to assemble your own board I have made a manual to aide in the assembly of your HiveTool v0.3 board; should you have questions.
File:HiveToolV0.3Board - Construction.pdf

Pictures of the External Container

Error creating thumbnail: File missing
Initial System Setup - Hive: HawaUbee