Difference between revisions of "NRF52840 Thread NCP"
(→Set up the border router on the Pi:) |
(→Set up the border router on the Pi:) |
||
| Line 49: | Line 49: | ||
Check wpan status | Check wpan status | ||
sudo wpanctl status | sudo wpanctl status | ||
| + | |||
| + | '''MUST ADD ROUTES ON ALL MACHINES!''' | ||
| + | route -6 add 2001:0002::/48 metric 1 dev eth0 | ||
| + | |||
| + | ==Install radvd== | ||
| + | |||
| + | |||
| + | Add interface wlan0 | ||
| + | |||
| + | sudo vi /etc/radvd.conf | ||
| + | |||
| + | interface wlan0 | ||
| + | { | ||
| + | AdvSendAdvert on; | ||
| + | prefix FD00:1122::/64 | ||
| + | { | ||
| + | AdvOnLink off; | ||
| + | AdvAutonomous on; | ||
| + | AdvRouterAddr on; | ||
| + | }; | ||
| + | }; | ||
| + | |||
| + | interface bt0 | ||
| + | { | ||
| + | AdvSendAdvert on; | ||
| + | prefix 2001:db8::/64 | ||
| + | { | ||
| + | AdvOnLink off; | ||
| + | AdvAutonomous on; | ||
| + | AdvRouterAddr on; | ||
| + | }; | ||
| + | }; | ||
| + | |||
| + | |||
| + | sudo systemctl stop radvd | ||
| + | |||
| + | |||
| + | ==Install libcoap== | ||
| + | sudo apt-get install build-essential autoconf automake libtool | ||
| + | git clone --recursive https://github.com/obgm/libcoap.git | ||
| + | cd libcoap | ||
| + | git checkout dtls | ||
| + | git submodule update --init --recursive | ||
| + | ./autogen.sh | ||
| + | ./configure --disable-documentation --disable-shared | ||
| + | make | ||
| + | sudo make install | ||
Revision as of 03:16, 15 January 2019
Pi Border Router with nRF52840 thread NCP
https://electronut.in/nrf52840-thread/
https://groups.google.com/forum/#!topic/openthread-users/9TFIATWWrxw
https://www.nordicsemi.com/DocLib/Content/SDK_Doc/Thread_SDK/v2-0-0/index
Contents
Install Network Co Processor (NCP) code on nRF52
Download nRF Connect program.
./nrfconnect-2.6.1-x86_64.AppImage
Downloaded the nRF5 SDK for Thread and Zigbee 2.0.0
https://www.nordicsemi.com/Software-and-Tools/Software/nRF5-SDK-for-Thread-and-Zigbee/Download
Write the NCP hex file to the dongle.
Set up the border router on the Pi:
You need both border router and wpantund:
https://openthread.io/guides/border-router/build
git clone https://github.com/openthread/borderrouter cd borderrouter ./script/bootstrap .configure --enable-debug --enable-ncp --enable-ftd --enable-commissioner --enable-joiner --enable-border-agent --enable-border-router --enable-commissioner --enable-udp-forward make sudo make install
git clone https://github.com/openthread/wpantund.git cd wpantund ./bootstrap.sh ./configure --sysconfdir=/etc --enable-debug make -j4 // -j4 (use 4 cores) may have locked it up make sudo make install
git clone https://github.com/openthread/openthread
./configure --enable-ncp --enable-ftd --enable-commissioner --enable-joiner --enable-border-agent --enable-border-router --enable-commissioner --enable-udp-forward
Check wpan status
sudo wpanctl status
MUST ADD ROUTES ON ALL MACHINES!
route -6 add 2001:0002::/48 metric 1 dev eth0
Install radvd
Add interface wlan0
sudo vi /etc/radvd.conf
interface wlan0
{
AdvSendAdvert on;
prefix FD00:1122::/64
{
AdvOnLink off;
AdvAutonomous on;
AdvRouterAddr on;
};
};
interface bt0
{
AdvSendAdvert on;
prefix 2001:db8::/64
{
AdvOnLink off;
AdvAutonomous on;
AdvRouterAddr on;
};
};
sudo systemctl stop radvd
Install libcoap
sudo apt-get install build-essential autoconf automake libtool git clone --recursive https://github.com/obgm/libcoap.git cd libcoap git checkout dtls git submodule update --init --recursive ./autogen.sh ./configure --disable-documentation --disable-shared make sudo make install
