Difference between revisions of "Hardware: Parts List"
| Line 7: | Line 7: | ||
| − | *Pi | + | *Raspberry Pi: A+ or B+,2,3 preferred. A and B (26 pin header) will work but not recommended. |
| − | *Power supply ( | + | *Power supply (120 VAC to +5 VDC, 12 VDC to 5 VDC USB converter) |
*SD RAM card | *SD RAM card | ||
*Hive Interface Board | *Hive Interface Board | ||
| − | *Enclosure | + | *Enclosure for electronics |
*Scale | *Scale | ||
*#Load cells | *#Load cells | ||
*#Load Cell Mounts (frame, rails, direct) | *#Load Cell Mounts (frame, rails, direct) | ||
*#Feet or rubber bumpers, metric bolts | *#Feet or rubber bumpers, metric bolts | ||
| − | *Temperature/Humidity Sensor(s) | + | *Options |
| − | *Lux Sensor | + | *#Temperature/Humidity Sensor(s) |
| − | *Rain Gauge | + | *#Lux Sensor |
| − | + | *#Rain Gauge | |
| + | *#Camera | ||
*Power (AC, Battery/Solar) | *Power (AC, Battery/Solar) | ||
*Internet (Ethernet, WiFi, Cell Phone Hot Spot) | *Internet (Ethernet, WiFi, Cell Phone Hot Spot) | ||
Revision as of 04:01, 25 March 2017
This page needs to be created.
The Hardware_list page is old and of date.
Here is different out of date parts list in pdf: Parts List.
- Raspberry Pi: A+ or B+,2,3 preferred. A and B (26 pin header) will work but not recommended.
- Power supply (120 VAC to +5 VDC, 12 VDC to 5 VDC USB converter)
- SD RAM card
- Hive Interface Board
- Enclosure for electronics
- Scale
- Load cells
- Load Cell Mounts (frame, rails, direct)
- Feet or rubber bumpers, metric bolts
- Options
- Temperature/Humidity Sensor(s)
- Lux Sensor
- Rain Gauge
- Camera
- Power (AC, Battery/Solar)
- Internet (Ethernet, WiFi, Cell Phone Hot Spot)
