Difference between revisions of "Create SD Image Version 0.7.4"

From HiveTool
Jump to: navigation, search
(Created page with "This page describes how the bootable Raspian-HiveTool image was created. This is for information only. '''''The easiest and best way to install Hivetool is to Software:_Ins...")
(No difference)

Revision as of 00:42, 29 March 2016

This page describes how the bootable Raspian-HiveTool image was created. This is for information only. The easiest and best way to install Hivetool is to download the latest image.


0.7.4

Bug Fixes

  1. set GPU_MEM, GPU_MEM_256, GPU_MEM_512, and GPU_MEM_1024 to sane values for different Pi models in config.txt.


Feature Request

  1. add latest Hive Control software

0.7.3

Bug Fixes

  1. replace hx711 and dth22 code with fixed versions.
  2. add export LC_NUMERIC="en_US.UTF-8" to hive.sh
  3. don't remove python tools when removing bloatware. Keep: wolfram-engine - a scientific platform, Idle and Idle3 - python language editors


Feature Request

  1. add Ryans Hive Controller code
  2. add xrdp, open62541 packages
  3. add Data Acquisition Daemon (DAD) code

Dad supports battery voltage monitoring and the rain gauge.


0.7.2

  1. Done Test most recent raspbian distro Jessie (4.1 Kernel)
  2. Done Removal of bloatware from Raspbian (games, educational, etc.)
  3. Done Hivetool Support Pi & Pi2 (auto detect preferred)
  4. Automatic removal of erroneous data from sensors
  5. Done Basic navigation from webserver index.html, especially config.pl and Hivestats with download.
  6. Menu driven selection & configuration of sensors (gpio 2,3 for DHT22s preassigned by menu default)
  7. Menu driven setup of essential parameters with choices that don't crash app when saving, grey out unused.
  8. Done Sensor calibration provisions (gain, offset)
  9. Display instantaneous sensor readings from config screen with read button
  10. Preload & configure Apache Webserver and database, Hivetool, sensor drivers for proven sensors.
  11. Update local & online hivestats graphs to display lux trend pen, (use latest hivestats with enhanced autoscaling for local)
  12. Network / wifi support out of the box seems to work well now, handle configuration on router side with DHCP reservation as may be needed.
  13. Add configuration menu item for naming pi, same as hivestats name?
  14. Minimize need to enter Raspiconfig, can timezone and time all be handled in hivetool config?
  15. Done Enable i2c & serial.
Retrieved from "http://18.212.38.72/index.php?title=Create_SD_Image_Version_0.7.4&oldid=2645"