Difference between revisions of "Create SD Image Version 0.71"

From HiveTool
Jump to: navigation, search
(→‎Config Apache)
(→‎Config Apache)
Line 66: Line 66:
  
 
=== Config Apache ===
 
=== Config Apache ===
 +
==Configure apache==
 +
# Set up apache to listen on port 8080 if using port forwarding:
 +
#:sudo vi /etc/apache2/ports.conf
 +
#:add Listen 8080
 +
#Add .pl to AddHandler cgi-script
 +
#:sudo vi /etc/apache2/mods-enabled/mime.conf
 +
#:uncomment #AddHandler cgi-script .cgi (around line 219) and add .pl so it looks like:
 +
#:AddHandler cgi-script .cgi .pl
 +
#add Includes and +ExecCGI to Options:
 +
#:sudo vi /etc/apache2/sites-enabled/000-default
 +
#:In stanza <Directory /var/www/>                                                                                                                                                     
 +
#:change
 +
#: Options Indexes FollowSymLinks MultiViews                                                                                                                         
 +
#:to
 +
#: Options Indexes FollowSymLinks MultiViews Includes +ExecCGI
 +
#Add index.shtml to DirectoryIndex:
 +
#:sudo vi /etc/apache2/mods-enabled/dir.conf
 +
#:Change
 +
#:DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm                                                                                               
 +
#:to
 +
#:DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm index.shtml                                                                                                 
 +
#Copy the include.load module to enable it
 +
#:sudo cp /etc/apache2/mods-available/include.load /etc/apache2/mods-enabled/
 +
#Restart Apache
 +
sudo apachectl restart  or      sudo/etc/rc4.d/S02apache2 restart
 +
 +
===Install bcm2835 library===
 +
 +
http://www.airspayce.com/mikem/bcm2835/
 +
 
==Configure apache==
 
==Configure apache==
 
# Set up apache to listen on port 8080 if using port forwarding:
 
# Set up apache to listen on port 8080 if using port forwarding:

Revision as of 11:38, 20 May 2015

Feature Request

  1. Most recent raspbian distro
  2. Removal of bloatware from Raspbian (games, educational as discussed)
  3. Hivetool Support Pi & Pi2 (auto detect preferred)
  4. Automatic removal of erroneous data from sensors
  5. Basic navigation from webserver index.html, especially config.pl and Hivestats with download.
  6. Menu driven selection & configuration of sensors (gpio 2,3 for DHT22s preassigned by menu default)
  7. Menu driven setup of essential parameters with choices that don't crash app when saving, grey out unused.
  8. Sensor calibration provisions (gain, offset)
  9. Display instantaneous sensor readings from config screen with read button
  10. Preload & configure Apache Webserver and database, Hivetool, sensor drivers for proven sensors.
  11. Update local & online hivestats graphs to display lux trend pen, (use latest hivestats with enhanced autoscaling for local)
  12. Network / wifi support out of the box seems to work well now, handle configuration on router side with DHCP reservation as may be needed.
  13. Add configuration menu item for naming pi, same as hivestats name?
  14. Minimize need to enter Raspiconfig, can timezone and time all be handled in hivetool config?
  15. Enable i2c & serial.

Bug Fixes

  1. Add timeout to crontab so hive.sh can't hang.

Create new image

Get latest Wheezy image

  1. Download, unzip, burn image.
  2. Boot
  3. DO NOT EXPAND file syatem!

Set up Wi-Fi

Add to /etc/wpa_supplicant/wpa_supplicant.conf: 

network={                                                                                                                                                                           
       ssid="dlink"                                                                                                                                                                
       key_mgmt=NONE                                                                                                                                                               
       auth_alg=OPEN                                                                                                                                                               
}


Wi-Fi auto reconnect to AP

  1. Go to /etc/ifplugd/action.d/ and rename the ifupdown file to ifupdown.original
  2. Then do:
cp /etc/wpa_supplicant/ifupdown.sh ./ifupdown

http://raspberrypi.stackexchange.com/questions/4120/how-to-automatically-reconnect-wifi

Remove packages we don't need

This will make room for software without expanding the image. 

sudo apt-get remove --purge wolfram-engine penguinspuzzle scratch dillo squeak-vm squeak-plugins-scratch sonic-pi idle idle3 netsurf-gtk netsurf-common
sudo apt-get autoremove
sudo apt-get clean
rm -rf /home/pi/python_games
sudo rm -rf /opt/vc

https://project.altservice.com/issues/418

Install packages we need

sudo apt-get -y update
sudo apt-get -y install gawk bc apache2 libusb-dev libgd-graph-perl libexpat1-dev sqlite3
sudo cpan GD::Text GD::Graph Date::Format XML::Simple DBI DBD::SQLite

Config Apache

Configure apache

  1. Set up apache to listen on port 8080 if using port forwarding:
    sudo vi /etc/apache2/ports.conf
    add Listen 8080
  2. Add .pl to AddHandler cgi-script
    sudo vi /etc/apache2/mods-enabled/mime.conf
    uncomment #AddHandler cgi-script .cgi (around line 219) and add .pl so it looks like:
    AddHandler cgi-script .cgi .pl
  3. add Includes and +ExecCGI to Options:
    sudo vi /etc/apache2/sites-enabled/000-default
    In stanza <Directory /var/www/>
    change
    Options Indexes FollowSymLinks MultiViews
    to
    Options Indexes FollowSymLinks MultiViews Includes +ExecCGI
  4. Add index.shtml to DirectoryIndex:
    sudo vi /etc/apache2/mods-enabled/dir.conf
    Change
    DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm
    to
    DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm index.shtml
  5. Copy the include.load module to enable it
    sudo cp /etc/apache2/mods-available/include.load /etc/apache2/mods-enabled/
  6. Restart Apache
sudo apachectl restart   or      sudo/etc/rc4.d/S02apache2 restart

Install bcm2835 library

http://www.airspayce.com/mikem/bcm2835/

Configure apache

  1. Set up apache to listen on port 8080 if using port forwarding:
    sudo vi /etc/apache2/ports.conf
    add Listen 8080
  2. Add .pl to AddHandler cgi-script
    sudo vi /etc/apache2/mods-enabled/mime.conf
    uncomment #AddHandler cgi-script .cgi (around line 219) and add .pl so it looks like:
    AddHandler cgi-script .cgi .pl
  3. add Includes and +ExecCGI to Options:
    sudo vi /etc/apache2/sites-enabled/000-default
    In stanza <Directory /var/www/>
    change
    Options Indexes FollowSymLinks MultiViews
    to
    Options Indexes FollowSymLinks MultiViews Includes +ExecCGI
  4. Add index.shtml to DirectoryIndex:
    sudo vi /etc/apache2/mods-enabled/dir.conf
    Change
    DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm
    to
    DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm index.shtml
  5. Copy the include.load module to enable it
    sudo cp /etc/apache2/mods-available/include.load /etc/apache2/mods-enabled/
  6. Restart Apache
sudo apachectl restart   or      sudo/etc/rc4.d/S02apache2 restart

Install bcm2835 library

http://www.airspayce.com/mikem/bcm2835/

Install wiringPi library

  1. add i2c-dev to /etc/modules (?)
  2. Install i2c tools
apt-get install i2c-tools
  1. run raspi-config and turn on i2c or in /etc/modprobe.d/raspi-blacklist.conf comment out:

blacklist i2c-bcm2708 (?)

  1. reboot or run:

modprobe -a i2c-bcm2708 

sudo apt-get install git-core
git clone git://git.drogon.net/wiringPi
cd wiringPi
./build

http://wiringpi.com/download-and-install/wiringPi

DHT22

Groove Seeed - DHT22 with modified code

hx711wp

2591 Adafruit with modified code.

crontab

# Check hive instruments every 5 minutes
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 3.5m /home/hivetool/hive.sh
#
# Check the server status
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 1m /home/hivetool/server_status.sh > /var/www/server_status.txt
Retrieved from "http://18.212.38.72/index.php?title=Create_SD_Image_Version_0.71&oldid=1816"