Difference between revisions of "NAPAPi"
| Line 3: | Line 3: | ||
<gallery widths=240 mode="packed"> | <gallery widths=240 mode="packed"> | ||
20150405_175626.jpg|Raspberry Pi in enclosure. | 20150405_175626.jpg|Raspberry Pi in enclosure. | ||
| − | 20150405_175824.jpg|Frame and Electronics. | + | 20150405_175824.jpg|Solid Aluminum Frame and Electronics. |
| − | 20150405_175840.jpg | + | 20150405_175840.jpg|Pi and 12 Volt 5A Charge Controller |
| − | 20150405_175907.jpg | + | 20150405_175907.jpg|Pi wired to DHT22 Temp / Humidity Sensors |
| − | 20150405_175940.jpg | + | 20150405_175940.jpg|Pi, Internal & External Temp / Humidity |
| − | 20150405_175952.jpg | + | 20150405_175952.jpg|Load Cells, Phidgets 4 channel signal conditioner |
20150405_180014.jpg|Closeup of Zemic load cell mounted on frame. | 20150405_180014.jpg|Closeup of Zemic load cell mounted on frame. | ||
20150405_180042.jpg|Phidget 4 channel strain gage amplifier and 24 bit ADC. | 20150405_180042.jpg|Phidget 4 channel strain gage amplifier and 24 bit ADC. | ||
| − | + | 20150407_175245.jpg|Levelling the Scale Frame | |
| − | |||
| − | 20150407_175245 | ||
| − | |||
20150407_184246.jpg|Battery charge controller and lead acid battery. | 20150407_184246.jpg|Battery charge controller and lead acid battery. | ||
| − | 20150407_184322.jpg | + | 20150407_184322.jpg|45W 12V Solar Panel with Deep Cycle Battery |
| − | 20150407_184331.jpg | + | 20150407_184331.jpg|NAPA-PI Hive in Ogden Apiary |
20150410_174342.jpg|Hardware cloth serving as Wi-Fi reflector. | 20150410_174342.jpg|Hardware cloth serving as Wi-Fi reflector. | ||
| − | 20150410_174350.jpg | + | 20150410_174350.jpg|Pi Beneath Hive, Scale & Wiring |
| − | 20150410_174407.jpg | + | 20150410_174407.jpg|Hive on Load Cell with Rubber Dampener |
20150410_180222.jpg|DHT22 Temperature/Humidity Sensor. | 20150410_180222.jpg|DHT22 Temperature/Humidity Sensor. | ||
</gallery> | </gallery> | ||
Latest revision as of 20:49, 14 April 2015
Click on a photo to enlarge.
Raspberry Pi in enclosure.
Solid Aluminum Frame and Electronics.
Pi and 12 Volt 5A Charge Controller
Pi wired to DHT22 Temp / Humidity Sensors
Pi, Internal & External Temp / Humidity
Load Cells, Phidgets 4 channel signal conditioner
Closeup of Zemic load cell mounted on frame.
Phidget 4 channel strain gage amplifier and 24 bit ADC.
Levelling the Scale Frame
Battery charge controller and lead acid battery.
45W 12V Solar Panel with Deep Cycle Battery
NAPA-PI Hive in Ogden Apiary
Hardware cloth serving as Wi-Fi reflector.
Pi Beneath Hive, Scale & Wiring
Hive on Load Cell with Rubber Dampener
DHT22 Temperature/Humidity Sensor.
