Difference between revisions of "Cheap hubs"
(Created page with "'''Warning: Don't use these cheap hubs!''' thumb|600px|Missed solder joints, solder splashes. thumb|600px|DO NOT USE THESE! ...") |
|||
| Line 1: | Line 1: | ||
| − | '''Warning: Don't use these cheap hubs!''' | + | '''Warning: Don't use these cheap USB hubs!''' |
[[File:Bad hub1.jpg|thumb|600px|Missed solder joints, solder splashes.]] | [[File:Bad hub1.jpg|thumb|600px|Missed solder joints, solder splashes.]] | ||
| − | |||
| − | |||
[[File:Bad hub2.jpg|thumb|600px|DO NOT USE THESE!]] | [[File:Bad hub2.jpg|thumb|600px|DO NOT USE THESE!]] | ||
[[File:Bad hub3.jpg|thumb|600px|Bad hub PC boards.]] | [[File:Bad hub3.jpg|thumb|600px|Bad hub PC boards.]] | ||
| + | |||
| + | |||
| + | An inspection of the board reveals solder splashes and poor soldering. | ||
| + | Use only brand name hubs (like Belkin) with 3 amp power supplies. | ||
| + | Even if you don't use the power supply, I suspect that a manufacturer that uses an ample power supply has a better unit. | ||
| + | |||
| + | The power supply that comes with it is only rated | ||
| + | at 1 amp - should by 3.5 amps (.5 amps per port 7 ports). And it wouldn't | ||
| + | even power the Pi (.5 amp). I had switched the power supply to one that came | ||
| + | with the Belkin hubs (3.5 amp) but bottom line is these hubs are no good. | ||
| + | |||
| + | They will back power the Pi through the hub's input port (usefull in this application, but a design defect). | ||
Latest revision as of 05:29, 15 October 2014
Warning: Don't use these cheap USB hubs!
An inspection of the board reveals solder splashes and poor soldering.
Use only brand name hubs (like Belkin) with 3 amp power supplies.
Even if you don't use the power supply, I suspect that a manufacturer that uses an ample power supply has a better unit.
The power supply that comes with it is only rated at 1 amp - should by 3.5 amps (.5 amps per port 7 ports). And it wouldn't even power the Pi (.5 amp). I had switched the power supply to one that came with the Belkin hubs (3.5 amp) but bottom line is these hubs are no good.
They will back power the Pi through the hub's input port (usefull in this application, but a design defect).
