Difference between revisions of "Frame Designs"
| Line 1: | Line 1: | ||
| − | If you use solid bottom boards, | + | ==Summary== |
| + | If you use solid bottom boards, consider building a wooden telescoping box to house the scale. It is cheap, easy, quick and it doesn't void the warranty on the scale. | ||
If you use screened bottom boards, a frame can be built to hold the load cells that will allow the debris to fall through. | If you use screened bottom boards, a frame can be built to hold the load cells that will allow the debris to fall through. | ||
| − | The load cells | + | The load cells can be removed from the scale and mounted in the frame. This voids the warranty. Or, new load cells purchased and a scale built from scratch using the CS5550 or AD |
If you use topbar hives ... | If you use topbar hives ... | ||
| Line 15: | Line 16: | ||
#[[Frame D| Unistrut/SuperStrut]] | #[[Frame D| Unistrut/SuperStrut]] | ||
#[[Frame E| 3D printed corner brackets/metal tubing]] | #[[Frame E| 3D printed corner brackets/metal tubing]] | ||
| + | |||
| + | ==Background== | ||
Revision as of 02:34, 22 March 2014
Summary
If you use solid bottom boards, consider building a wooden telescoping box to house the scale. It is cheap, easy, quick and it doesn't void the warranty on the scale.
If you use screened bottom boards, a frame can be built to hold the load cells that will allow the debris to fall through. The load cells can be removed from the scale and mounted in the frame. This voids the warranty. Or, new load cells purchased and a scale built from scratch using the CS5550 or AD
If you use topbar hives ...
The goal is a low cost frame that can be built from readily available materials by students using tools found in a home shop. This has not yet been achieved.
Five frames have been designed, each with advantages and disadvantages:
- Punched and bent
- Welded Steel Rectangular Tubing
- Progressive die stamped and welded
- Unistrut/SuperStrut
- 3D printed corner brackets/metal tubing
