Difference between revisions of "Sensors"
| Line 4: | Line 4: | ||
File:CZL602x.jpg|[[Sensors: CZL602X Load Cell|Weight<br>CZL602X<br>Load Cell]] | File:CZL602x.jpg|[[Sensors: CZL602X Load Cell|Weight<br>CZL602X<br>Load Cell]] | ||
File:Dht22 wiring1.jpg|[[Sensors: DHT22|Temperature/Rh<br> DHT22]] | File:Dht22 wiring1.jpg|[[Sensors: DHT22|Temperature/Rh<br> DHT22]] | ||
| − | File: | + | File:Tsl2591.jpg|[[Sensors: TSL2591|Lux<br>TSL2591]] |
File:DS18B20-TO92.jpeg|[[Sensors: DS18B20|Temperature<br>DS18B20 TO92]] | File:DS18B20-TO92.jpeg|[[Sensors: DS18B20|Temperature<br>DS18B20 TO92]] | ||
File:BME680 Adafruit c.jpg|[[Sensors: BME680|Temp, Rh,<br>Pressure, VOCs<br>Bosh BME680]] | File:BME680 Adafruit c.jpg|[[Sensors: BME680|Temp, Rh,<br>Pressure, VOCs<br>Bosh BME680]] | ||
Revision as of 17:12, 22 August 2018
Different platforms support different sensors. Recommended sensors change as new ones are added. Check back before you buy.
- CZL602x.jpg
Platform
Most of the current development is on the Pi but other platforms are added as they are developed. The PC (laptop or desktop mother board) is included for legacy support.
Pi
The Pi has digital GPIO lines which allow easy interfacing to digital sensors. When terminated according to the sensor wiring instructions, these sensors will plug into the Hive Interface Board
| Pi Recommended Sensors | |||
|---|---|---|---|
| Variable | Sensor | Specs | Cost |
| Weight | HX711 | ||
| Temp/RH | DHT22 | ||
| Temp | 1-Wire | ||
| Lux | TSL2591 | ||
| Rain | RainWise | ||
| Video | PiCam | ||
| Audio | |||
The sensors listed below for use with a PC are also supported.
PC
With Laptops and PC motherboards, IO is usually limited to USB and serial devices.
- Adam Equipment
- TEMPerHUM
- USB video camera
- USB microphone
- Phidget
