Difference between revisions of "Sensors"
| Line 1: | Line 1: | ||
Different platforms support different sensors. Recommended sensors change as new ones are added. Check back before you buy. | Different platforms support different sensors. Recommended sensors change as new ones are added. Check back before you buy. | ||
<gallery> | <gallery> | ||
| − | File:Hx711 version2c.jpg |[[Sensors: HX711|Weight<br>HX711]] | + | File:Hx711 version2c.jpg |[[Sensors: HX711|Weight<br>HX711<br>ADC]] |
| − | File:CZL602x.jpg|[[Sensors: CZL602X Load Cell|Weight<br>CZL602X Load Cell]] | + | File:CZL602x.jpg|[[Sensors: CZL602X Load Cell|Weight<br>CZL602X<br>Load Cell]] |
File:Dht22 wiring1.jpg|[[Sensors: DHT22|Temperature/Rh<br> DHT22]] | File:Dht22 wiring1.jpg|[[Sensors: DHT22|Temperature/Rh<br> DHT22]] | ||
File:Wiring TSL2591 Lux.jpg|[[Sensors: TSL2591|Lux<br>TSL2591]] | File:Wiring TSL2591 Lux.jpg|[[Sensors: TSL2591|Lux<br>TSL2591]] | ||
| − | File:DS18B20. | + | File:DS18B20-TO92.jpeg|[[Sensors: DS18B20|Temperature<br>DS18B20 TO92]] |
| − | File:BME680 Adafruit c.jpg|[[Sensors: BME680| | + | File:BME680 Adafruit c.jpg|[[Sensors: BME680|Temp, Rh,<br>Pressure, VOCs<br>Bosh BME680]] |
File:BME680 PiMoroni breakout v2.jpg | File:BME680 PiMoroni breakout v2.jpg | ||
</gallery> | </gallery> | ||
| + | |||
==Platform== | ==Platform== | ||
| − | |||
Most of the current development is on the Pi but other platforms are added as they are developed. The PC (laptop or desktop mother board) is included for legacy support. | Most of the current development is on the Pi but other platforms are added as they are developed. The PC (laptop or desktop mother board) is included for legacy support. | ||
Revision as of 08:21, 22 August 2018
Different platforms support different sensors. Recommended sensors change as new ones are added. Check back before you buy.
- CZL602x.jpg
- Error creating thumbnail: File missing
Platform
Most of the current development is on the Pi but other platforms are added as they are developed. The PC (laptop or desktop mother board) is included for legacy support.
Pi
The Pi has digital GPIO lines which allow easy interfacing to digital sensors. When terminated according to the sensor wiring instructions, these sensors will plug into the Hive Interface Board
| Pi Recommended Sensors | |||
|---|---|---|---|
| Variable | Sensor | Specs | Cost |
| Weight | HX711 | ||
| Temp/RH | DHT22 | ||
| Temp | 1-Wire | ||
| Lux | TSL2591 | ||
| Rain | RainWise | ||
| Video | PiCam | ||
| Audio | |||
The sensors listed below for use with a PC are also supported.
PC
With Laptops and PC motherboards, IO is usually limited to USB and serial devices.
- Adam Equipment
- TEMPerHUM
- USB video camera
- USB microphone
- Phidget
