Difference between revisions of "Frame: Vacuum Formed Scale: A Plastic/Aluminum Hybrid"
| Line 1: | Line 1: | ||
'''OVERVIEW:'''<br> | '''OVERVIEW:'''<br> | ||
| − | The vacuum formed scale utilizes a | + | The vacuum formed scale utilizes a rectangular plastic hive rail with a reinforced aluminum undercarriage. The general concept behind this scale was to produce an affordable light-weight scale that was able to accommodate both ten frame and eight frame Langstroth beehives. An additional aluminum undercarriage was added as extra reinforcement was needed to support the weight of the cantilevered load cells. |
| − | ''' | + | '''PRODUCTION:'''<br> |
Production of this scale started out by creating a very accurate wooden mold that was able to be used in a commercial vacuum forming machine. The plastic used was 1/4" thick and possesses UV resistant properties that could handle the exposure to weather elements. After the plastic form was produced additional work was done to remove the unneeded flashings. Holes were drilled and aluminum bars were cut to size and added to properly secure the load cells. | Production of this scale started out by creating a very accurate wooden mold that was able to be used in a commercial vacuum forming machine. The plastic used was 1/4" thick and possesses UV resistant properties that could handle the exposure to weather elements. After the plastic form was produced additional work was done to remove the unneeded flashings. Holes were drilled and aluminum bars were cut to size and added to properly secure the load cells. | ||
Revision as of 19:45, 14 March 2017
OVERVIEW:
The vacuum formed scale utilizes a rectangular plastic hive rail with a reinforced aluminum undercarriage. The general concept behind this scale was to produce an affordable light-weight scale that was able to accommodate both ten frame and eight frame Langstroth beehives. An additional aluminum undercarriage was added as extra reinforcement was needed to support the weight of the cantilevered load cells.
PRODUCTION:
Production of this scale started out by creating a very accurate wooden mold that was able to be used in a commercial vacuum forming machine. The plastic used was 1/4" thick and possesses UV resistant properties that could handle the exposure to weather elements. After the plastic form was produced additional work was done to remove the unneeded flashings. Holes were drilled and aluminum bars were cut to size and added to properly secure the load cells.
- Error creating thumbnail: File missing
Stainless Steel Scale with Load Cells
- Error creating thumbnail: File missing
Testing the Scale with Weights
- Error creating thumbnail: File missing
Leveling and Installation of the Scale
- Error creating thumbnail: File missing
Rough Installation of Components
- Error creating thumbnail: File missing
Connection to the Internet Accomplished
- Error creating thumbnail: File missing
HawaUbee Hive Langstroth 10-Frame
- Error creating thumbnail: File missing
Inside the Container
- Error creating thumbnail: File missing
HawaUbee(NASA #TX01)is Complete
HiveTool Scale: HawaUbee02
- Error creating thumbnail: File missing
Stainless Steel Scale with load cells
- Error creating thumbnail: File missing
HiveTool Development Board Components
- Error creating thumbnail: File missing
Soldering Components
- Error creating thumbnail: File missing
HawaUbee02 powered by battery
- Error creating thumbnail: File missing
Preparing to install the scale
- Error creating thumbnail: File missing
Installing HawaUbee02 Computer
- Error creating thumbnail: File missing
Construction of Light Sensor
- Error creating thumbnail: File missing
Final Installation of HawaUbee02 Under a Flow Hive
Parts List
Below is a list of parts that will produce a system that is very close to what is at the HawaUbee Apiary. Keep in mind that this system is way above and beyond a typical system it is also completely off the wired grid, utilizing solar power and a hotspot for wireless internet connection. This cost does not include tools, labor, Hivetool Development Kit, and actual scale construction. The hotspot is a 5GB/month plan and roughly costs $50 per month. To see a breakdown click on the PartsList - HawaUbee.xlsx link that is below this image.
File:PartsList - HawaUbee.xlsx
Soldering/Construction Manual
If you have decided to assemble your own board below is a manual to aide in the assembly of your HiveTool v0.3 board.
File:HiveToolV0.3Board - Construction.pdf
EZ Connector for the DHT22 (Temperature) Sensor
Soldering the DHT22 is not an easy thing to do, even for the savvy solder-er utilizing a high-end iron and a convenient clamp. I have found a connector/cable combo that will take the headache out of making/repairing/replacing your temperature sensors. The wire leads off the connector are much easier to solder, I even accomplished this in-field with relative ease. This cable can be purchased at Amazon.com for around $6.00 for a quantity of ten.
Search: "'TronicsPros RGB LED Light Strips Female Connector RGB LED Strip Connector Cable" I am going to call the connector the DHT-EZ for the descriptors below.
- Error creating thumbnail: File missing
Picture of the DHT-EZ
- Error creating thumbnail: File missing
DHT22 sensor is inserted into the DHT-EZ
- Error creating thumbnail: File missing
Shrink Tubing Securely attaches the DHT22 to the DHT22-EZ
- Error creating thumbnail: File missing
Leads off the DHT-22EZ are soldered and insulated
Lightbulb Lux Sensor
This is a creative play off of the ping pong ball setup of the Sensi of Sensors, Adrian Ogden. This model utilizes a carefully disassembled 60W Sylvania LED light bulb. I probably should have included a desiccant in the construction of this which should be considered in future models. Take note of the clear piece of plastic that I added between the back of the sensor and the metal piece on the light bulb (pictured below).
- Error creating thumbnail: File missing
Sylvania 60W LED Bulbs
- Error creating thumbnail: File missing
Bulb and Lux Sensor
- Error creating thumbnail: File missing
Dome removed from bulb base (wear gloves)
- Error creating thumbnail: File missing
Removal of LEDs,*Installation of Plastic Insulator* and Notch bulb body for wire
- Error creating thumbnail: File missing
Solder wires to Lux Sensor
- Error creating thumbnail: File missing
Secure Lux Sensor to bulb base
- Error creating thumbnail: File missing
Use electrical tape to reattach dome to bulb body
- Error creating thumbnail: File missing
Secure using electrical tape to 3/4' PVC pipe
Solution to Overheating Hot Spot
If you are in areas of extreme heat during the summertime, you may have problems with your equipment overheating. Fortunately the only gadget I was having problems with was the AT&T Velocity Hotspot. After tossing around a few ideas, inclusive of using a super mini refrigerator I decided on using a CPU air cooler as a viable option. You will undoubtedly have to have an exterior container to take advantage of this option. I also had to make a wooden mount to hold the air-cooler upright.
- FAN-1.JPG
Type of CPU Air Cooler I used
- Error creating thumbnail: File missing
Remove back plate exposing the battery pack
- Error creating thumbnail: File missing
Fasten the Hotspot to the cooler with zip-ties
- Error creating thumbnail: File missing
The cooler in the enclosure, I have a second fan to move air also
Super Affordable Scale Option
Current Project
