Difference between revisions of "Software: Install Hivetool Pi image"
| Line 46: | Line 46: | ||
#On a Windows PC setup a new remote desktop connection (RDP), enter target IP address of Pi | #On a Windows PC setup a new remote desktop connection (RDP), enter target IP address of Pi | ||
#If the Pi is found you will be prompted to enter the default user "pi" and password "raspberry" | #If the Pi is found you will be prompted to enter the default user "pi" and password "raspberry" | ||
| + | #Leave the default module as "sesmon-Xvnc" | ||
| + | #Once connected you will see the Pi desktop, menu to "preferences"sub "raspberry pi configuration" | ||
| + | #Expand file system, then OK to reboot | ||
| + | #Reestablish remote desktop connection | ||
| + | #Configure WiFi if used | ||
Revision as of 23:43, 2 March 2016
Contents
Download Image
Download latest image currently hivetool073.zip rev. 0.7.3 as of 2-3-2016 Caution this zipped image file is large at 1,894,183 megabytes, consider bandwidth of internet connection. https://drive.google.com/open?id=0B_3xqxGS2psWN1hTSmk5SldJSms
Calculate MD5 sum of zipped image:
md5sum hivetool073.zip
f1618e26ff1b03dfc2fae722e537b6d2 hivetool073.zip
Un Zip
Copy the image to the SD card
Make micro SD card on Unix/Linux system
Recommend 16 gig with 48 mbps or better Detailed instructions: http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Pi.21.29
- Determine the device for the card reader (/dev/mmcblk0 on my laptop).
- Copy the image to the SD card:
- dd bs=4M if=2014-09-09-wheezy-raspbian.img of=/dev/mmcblk0
Make SD card on Windows system
raspberrypi.org recommends using: http://sourceforge.net/projects/win32diskimager/ But be careful. REMOVE any other USB memory devices from your computer. Detailed instructions: http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Windows
- REMOVE any other USB memory devices from your computer.
- Plug in SD Card and confirm device letter using Windows Explorer.
- Start Win32DiskImager
- Browse to source file (image in downloads directory)
- Check MD5 hash (0c1f26195db2f1a158bd88e95448fedb)
- Click on Write
- Confirm successful write then exit
- The SD card image is called "boot" 25 files now visible in Windows explorer
- Windows will report 40 megabytes free space on the SD card
You are now ready to eject micro SD card and place into the Pi
Setup Pi Operating system
- Install micro SD card into pi, power up with Ethernet or local terminal connected
- If using Ethernet determine IP address by viewing latest entry in access point
- Identify IP in the DHCP table named "raspberrypi"
- On a Windows PC setup a new remote desktop connection (RDP), enter target IP address of Pi
- If the Pi is found you will be prompted to enter the default user "pi" and password "raspberry"
- Leave the default module as "sesmon-Xvnc"
- Once connected you will see the Pi desktop, menu to "preferences"sub "raspberry pi configuration"
- Expand file system, then OK to reboot
- Reestablish remote desktop connection
- Configure WiFi if used
