Difference between revisions of "Talk:XXX: Load Hivetool on the Pi"

From HiveTool
Jump to: navigation, search
Line 3: Line 3:
 
'''FROM:'''
 
'''FROM:'''
 
<strike>
 
<strike>
To set a static IP if needed for port forwarding through the firewall.
+
To set a static IP if needed for port forwarding through the firewall.
set static ip for port forwarding
+
#set static ip for port forwarding
sudo vi /etc/network/interfaces:
+
#:sudo vi /etc/network/interfaces:
iface eth0 inet dhcp
+
#:iface eth0 inet dhcp
iface eth0 inet static
+
#:iface eth0 inet static
address 192.168.254.31
+
#:    address 192.168.254.31
netmask 255.255.255.0
+
#:    netmask 255.255.255.0
gateway 192.168.254.254
+
#:    gateway 192.168.254.254
Set the dns Servers
+
#Set the dns Servers
/etc/network/interfaces
+
#:/etc/network/interfaces
/etc/dhcp/dhclient.conf
+
#:/etc/dhcp/dhclient.conf
 
</strike>
 
</strike>
  
 
'''TO:'''
 
'''TO:'''
At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup
+
#At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup
 
   
 
   
 
interface eth0
 
interface eth0

Revision as of 18:57, 27 December 2015

CHANGE: 6. Set the Ethernet parameters and DNS servers

FROM: To set a static IP if needed for port forwarding through the firewall.

  1. set static ip for port forwarding
    sudo vi /etc/network/interfaces:
    iface eth0 inet dhcp
    iface eth0 inet static
    address 192.168.254.31
    netmask 255.255.255.0
    gateway 192.168.254.254
  2. Set the dns Servers
    /etc/network/interfaces
    /etc/dhcp/dhclient.conf

TO:

  1. At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup

interface eth0 static ip_address=192.168.254.31/24 static routers=192.168.254.254 static domain_name_servers=192.168.254.254 8.8.8.8

From https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=124423