Create SD Image Version 0.71

Feature Request

1. Most recent raspbian distro
2. Removal of bloatware from Raspbian (games, educational as discussed)
3. Hivetool Support Pi & Pi2 (auto detect preferred)
4. Automatic removal of erroneous data from sensors
5. Basic navigation from webserver index.html, especially config.pl and Hivestats with download.
6. Menu driven selection & configuration of sensors (gpio 2,3 for DHT22s preassigned by menu default)
7. Menu driven setup of essential parameters with choices that don't crash app when saving, grey out unused.
8. Sensor calibration provisions (gain, offset)
9. Display instantaneous sensor readings from config screen with read button
10. Preload & configure Apache Webserver and database, Hivetool, sensor drivers for proven sensors.
11. Update local & online hivestats graphs to display lux trend pen, (use latest hivestats with enhanced autoscaling for local)
12. Network / wifi support out of the box seems to work well now, handle configuration on router side with DHCP reservation as may be needed.
13. Add configuration menu item for naming pi, same as hivestats name?
14. Minimize need to enter Raspiconfig, can timezone and time all be handled in hivetool config?
15. Enable i2c & serial.

Bug Fixes

1. Add timeout to crontab so hive.sh can't hang.

Create new image

Get latest Wheezy image

1. Download, unzip, burn image.
2. Boot
3. DO NOT EXPAND file syatem!

Set up Wi-Fi

Add to /etc/wpa_supplicant/wpa_supplicant.conf:

network={                                                                                                                                                                           
       ssid="dlink"                                                                                                                                                                
       key_mgmt=NONE                                                                                                                                                               
       auth_alg=OPEN                                                                                                                                                               
}                                                                                                                                                                                   

Wi-Fi auto reconnect to AP

1. Go to /etc/ifplugd/action.d/ and rename the ifupdown file to ifupdown.original
2. Then do:

cp /etc/wpa_supplicant/ifupdown.sh ./ifupdown

http://raspberrypi.stackexchange.com/questions/4120/how-to-automatically-reconnect-wifi

Remove packages we don't need

This will make room for software without expanding the image.

sudo apt-get remove --purge wolfram-engine penguinspuzzle scratch dillo squeak-vm squeak-plugins-scratch sonic-pi idle idle3 netsurf-gtk netsurf-common
sudo apt-get autoremove
sudo apt-get clean
rm -rf /home/pi/python_games
sudo rm -rf /opt/vc

https://project.altservice.com/issues/418

Install packages we need

sudo apt-get -y update
sudo apt-get -y install gawk bc apache2 libusb-dev libgd-graph-perl libexpat1-dev sqlite3
sudo cpan GD::Text GD::Graph Date::Format XML::Simple DBI DBD::SQLite

Config Apache

bcm2835 library

http://www.airspayce.com/mikem/bcm2835/

Install wiringPi library

1. add i2c-dev to /etc/modules (?)
2. Install i2c tools

apt-get install i2c-tools

1. run raspi-config and turn on i2c or in /etc/modprobe.d/raspi-blacklist.conf comment out:

blacklist i2c-bcm2708 (?)

1. reboot or run:

modprobe -a i2c-bcm2708

sudo apt-get install git-core
git clone git://git.drogon.net/wiringPi
cd wiringPi
./build

http://wiringpi.com/download-and-install/wiringPi

DHT22

Groove Seeed - DHT22 with modified code

hx711wp

2591 Adafruit with modified code.

crontab

# Check hive instruments every 5 minutes
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 3.5m /home/hivetool/hive.sh
#
# Check the server status
0,5,10,15,20,25,30,35,40,45,50,55 * * * * timeout -s KILL 1m /home/hivetool/server_status.sh > /var/www/server_status.txt