Difference between revisions of "Sensors: DS18B20"
(→Read a device) |
|||
(One intermediate revision by the same user not shown) | |||
Line 56: | Line 56: | ||
t=20875 | t=20875 | ||
+ | === Read all devices=== | ||
+ | |||
+ | # /bin/bash | ||
+ | # | ||
+ | PREFIX="/sys/bus/w1/devices/" | ||
+ | PREFIX_LEN=${#PREFIX}; | ||
+ | |||
+ | DIRLIST=(${PREFIX}28*) | ||
+ | |||
+ | for FILENAME in ${DIRLIST[@]} | ||
+ | do | ||
+ | DEVICE="${FILENAME:$PREFIX_LEN}"; | ||
+ | echo -n "$DEVICE " | ||
+ | cat $FILENAME/w1_slave|grep -Eo "t=\-*[0-9]{1,5}" | ||
+ | done |
Latest revision as of 18:09, 16 March 2019
- Power supply range: 3.0V to 5.5V.
- Operating temperature range: -55°C to +125°C (-67°F to +257°F).
- Accuracy over the range of -10°C to +85°C: ±0.5°C.
- No other components, uses 1-Wire Bus
- TO-92 case or in encapsulated in stainless steel tube.
- Output lead: red (VCC), yellow(DATA) , black(GND).
Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus
The readings from 3 devices thermally tied together are very stable and close to each other:
Tue Jul 10 12:39:58 EDT 2018 t=20750 t=20562 t=20625 Tue Jul 10 12:40:30 EDT 2018 t=20750 t=20562 t=20625 Tue Jul 10 12:41:03 EDT 2018 t=20750 t=20562 t=20625 Tue Jul 10 12:44:20 EDT 2018 t=20750 t=20562 t=20625
List the devices on the bus
ls -l /sys/bus/w1/devices/
total 0 lrwxrwxrwx 1 root root 0 Jul 10 12:49 00-400000000000 -> ../../../devices/w1_bus_master1/00-400000000000 lrwxrwxrwx 1 root root 0 Jul 10 12:49 28-0317201a05ff -> ../../../devices/w1_bus_master1/28-0317201a05ff lrwxrwxrwx 1 root root 0 Jul 10 12:49 28-03172025fdff -> ../../../devices/w1_bus_master1/28-03172025fdff lrwxrwxrwx 1 root root 0 Jul 10 12:49 28-041720c6d4ff -> ../../../devices/w1_bus_master1/28-041720c6d4ff lrwxrwxrwx 1 root root 0 Jul 9 22:09 w1_bus_master1 -> ../../../devices/w1_bus_master1
Note that 00-400000000000 is a "phantom" device.
Read a device
cat /sys/bus/w1/devices/28-03172025fdff/w1_slave|grep -Eo "t=\-*[0-9]{1,5}" t=20875
Read all devices
# /bin/bash # PREFIX="/sys/bus/w1/devices/" PREFIX_LEN=${#PREFIX}; DIRLIST=(${PREFIX}28*) for FILENAME in ${DIRLIST[@]} do DEVICE="${FILENAME:$PREFIX_LEN}"; echo -n "$DEVICE " cat $FILENAME/w1_slave|grep -Eo "t=\-*[0-9]{1,5}" done