Difference between revisions of "Software:Solar Power"
(→sync_clock.sh) |
(→smsc95xx_up) |
||
Line 1: | Line 1: | ||
==smsc95xx_up== | ==smsc95xx_up== | ||
+ | |||
+ | Turns on the Ethernet and USB ports. Sets up networking. | ||
+ | |||
<code><pre> | <code><pre> | ||
echo 0x1 > /sys/devices/platform/bcm2708_usb/buspower | echo 0x1 > /sys/devices/platform/bcm2708_usb/buspower |
Revision as of 08:49, 28 January 2014
smsc95xx_up
Turns on the Ethernet and USB ports. Sets up networking.
echo 0x1 > /sys/devices/platform/bcm2708_usb/buspower
sleep 3
/sbin/ifconfig wlan0 down
echo "search domain_not_set.invalid
nameserver 166.102.165.11
nameserver 68.238.112.12" > /etc/resolv.conf
/sbin/ifconfig wlan0 192.168.0.11 up
/sbin/iwconfig wlan0 mode Managed
/sbin/iwconfig wlan0 essid dlink
/sbin/route add default gw 192.168.0.1 wlan0
smsc95xx_down
/sbin/ifconfig wlan0 down
echo 0x0 > /sys/devices/platform/bcm2708_usb/buspower
sync_clock.sh
Syncs the clock. Call by cron and rc.local.
/home/hivetool/smsc95xx_up
timeout 20 /usr/sbin/ntpd -qg
/home/hivetool/smsc95xx_down
rc.local
Sets the clock on boot up.
timeout 60 /home/hivetool/sync_clock.sh