Difference between revisions of "NRF52840 Thread NCP"
| Line 24: | Line 24: | ||
==Set up the border router on the Pi:== | ==Set up the border router on the Pi:== | ||
You need both border router and wpantund: | You need both border router and wpantund: | ||
| + | |||
| + | ===Install borderrouter code=== | ||
https://openthread.io/guides/border-router/build | https://openthread.io/guides/border-router/build | ||
| Line 34: | Line 36: | ||
sudo make install | sudo make install | ||
| + | ===Install wpantund=== | ||
git clone https://github.com/openthread/wpantund.git | git clone https://github.com/openthread/wpantund.git | ||
| Line 49: | Line 52: | ||
Check wpan status | Check wpan status | ||
sudo wpanctl status | sudo wpanctl status | ||
| − | |||
| − | |||
| − | |||
==Install radvd== | ==Install radvd== | ||
| Line 84: | Line 84: | ||
sudo systemctl stop radvd | sudo systemctl stop radvd | ||
| + | |||
| + | ===Add IPv6 routes === | ||
| + | |||
| + | '''MUST ADD ROUTES ON ALL MACHINES!''' | ||
| + | route -6 add 2001:0002::/48 metric 1 dev eth0 | ||
| + | |||
| + | |||
Revision as of 03:27, 15 January 2019
Pi Border Router with nRF52840 thread NCP
https://electronut.in/nrf52840-thread/
https://groups.google.com/forum/#!topic/openthread-users/9TFIATWWrxw
https://www.nordicsemi.com/DocLib/Content/SDK_Doc/Thread_SDK/v2-0-0/index
Contents
Install Network Co Processor (NCP) code on nRF52
Download nRF Connect program.
./nrfconnect-2.6.1-x86_64.AppImage
Downloaded the nRF5 SDK for Thread and Zigbee 2.0.0
https://www.nordicsemi.com/Software-and-Tools/Software/nRF5-SDK-for-Thread-and-Zigbee/Download
Write the NCP hex file to the dongle.
Set up the border router on the Pi:
You need both border router and wpantund:
Install borderrouter code
https://openthread.io/guides/border-router/build
git clone https://github.com/openthread/borderrouter cd borderrouter ./script/bootstrap .configure --enable-debug --enable-ncp --enable-ftd --enable-commissioner --enable-joiner --enable-border-agent --enable-border-router --enable-commissioner --enable-udp-forward make sudo make install
Install wpantund
git clone https://github.com/openthread/wpantund.git cd wpantund ./bootstrap.sh ./configure --sysconfdir=/etc --enable-debug make -j4 // -j4 (use 4 cores) may have locked it up make sudo make install
git clone https://github.com/openthread/openthread
./configure --enable-ncp --enable-ftd --enable-commissioner --enable-joiner --enable-border-agent --enable-border-router --enable-commissioner --enable-udp-forward
Check wpan status
sudo wpanctl status
Install radvd
Add interface wlan0
sudo vi /etc/radvd.conf
interface wlan0
{
AdvSendAdvert on;
prefix FD00:1122::/64
{
AdvOnLink off;
AdvAutonomous on;
AdvRouterAddr on;
};
};
interface bt0
{
AdvSendAdvert on;
prefix 2001:db8::/64
{
AdvOnLink off;
AdvAutonomous on;
AdvRouterAddr on;
};
};
sudo systemctl stop radvd
Add IPv6 routes
MUST ADD ROUTES ON ALL MACHINES!
route -6 add 2001:0002::/48 metric 1 dev eth0
Install libcoap
https://learn.pimoroni.com/tutorial/sandyj/controlling-ikea-tradfri-lights-from-your-pi
sudo apt-get install build-essential autoconf automake libtool git clone --recursive https://github.com/obgm/libcoap.git cd libcoap git checkout dtls git submodule update --init --recursive ./autogen.sh ./configure --disable-documentation --disable-shared make sudo make install
