Difference between revisions of "Change: Hive Interface 0.3"

From HiveTool
Jump to: navigation, search
Line 23: Line 23:
 
| Ground
 
| Ground
 
|}
 
|}
 +
 +
{| class="wikitable"
 +
! scope="row" colspan="2"| H7 SPI ver 0.3
 +
|-
 +
! scope="col"| Pin
 +
! scope="col"| Signal
 +
|-
 +
| 1
 +
| +3.3
 +
|-
 +
| 2
 +
| GPIO 14 SPIO CLK
 +
|-
 +
| 3
 +
| GPIO 13 SPIO MISO
 +
|-
 +
| 4
 +
| GPIO 12 SPIO MOSI
 +
|-
 +
| 5
 +
| GPIO 10 SPIO CE0
 +
|-
 +
| 6
 +
| Ground
 +
|}
 +
  
 
* Change pins on H2 I2C so RTC will plug in. Remove +5 VDC from Pin 1. Move ground on C?.  See http://hivetool.org/w/index.php?title=Real_Time_Clock_RTC
 
* Change pins on H2 I2C so RTC will plug in. Remove +5 VDC from Pin 1. Move ground on C?.  See http://hivetool.org/w/index.php?title=Real_Time_Clock_RTC

Revision as of 17:19, 23 April 2018

  • Change GPIO pin for LED from pin 7 (default 1-wire) to pin 11.
  • Increase hole size for blue 12 VDC power connector.
  • Add Chip Select to SPI (GPIO 10 SPI0_CE0) to H7. This is for the AD7124-8 Eval Board. Currently:
H7 SPI ver 0.3
Pin Signal
1 +3.3
2 GPIO 14 SPIO CLK
3 GPIO 13 SPIO MISO
4 GPIO 12 SPIO MOSI
5 Ground
H7 SPI ver 0.3
Pin Signal
1 +3.3
2 GPIO 14 SPIO CLK
3 GPIO 13 SPIO MISO
4 GPIO 12 SPIO MOSI
5 GPIO 10 SPIO CE0
6 Ground


Currently:

H2 I2C Bus
Pin Signal
1 +5
2 +3.3
3 I2C
4 I2C
5 Ground

New (but remove + 5 and make Pin 5 NC:

Old H2 I2C Bus New H2 for RTC
Pin Signal New Pin
1 +5 No connect
2 +3.3 Pin 1 of H2
3 I2C Pin 2 of H2
4 I2C Pin 3 of H2
5 Ground No connect
Ground for C Ground Pin 5 of H2
Retrieved from "http://18.212.38.72/index.php?title=Change:_Hive_Interface_0.3&oldid=3567"