Difference between revisions of "Talk:XXX: Load Hivetool on the Pi"
m (Paul moved page Talk:Load Hivetool on the Pi to Talk:XXX: Load Hivetool on the Pi without leaving a redirect) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 2: | Line 2: | ||
'''FROM:''' | '''FROM:''' | ||
| + | |||
<strike> | <strike> | ||
To set a static IP if needed for port forwarding through the firewall. | To set a static IP if needed for port forwarding through the firewall. | ||
| Line 19: | Line 20: | ||
#At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup | #At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup | ||
| − | interface eth0 | + | interface eth0 |
| − | static ip_address=192.168.254.31/24 | + | static ip_address=192.168.254.31/24 |
| − | static routers=192.168.254.254 | + | static routers=192.168.254.254 |
| − | static domain_name_servers=192.168.254.254 8.8.8.8 | + | static domain_name_servers=192.168.254.254 8.8.8.8 |
From https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=124423 | From https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=124423 | ||
Latest revision as of 03:38, 9 March 2016
CHANGE: 6. Set the Ethernet parameters and DNS servers
FROM:
To set a static IP if needed for port forwarding through the firewall.
- set static ip for port forwarding
- sudo vi /etc/network/interfaces:
- iface eth0 inet dhcp
- iface eth0 inet static
- address 192.168.254.31
- netmask 255.255.255.0
- gateway 192.168.254.254
- Set the dns Servers
- /etc/network/interfaces
- /etc/dhcp/dhclient.conf
TO:
- At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup
interface eth0 static ip_address=192.168.254.31/24 static routers=192.168.254.254 static domain_name_servers=192.168.254.254 8.8.8.8
From https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=124423
