Difference between revisions of "Software: Install Hivetool Pi image"
(→Setup Pi Using Windows Operating System) |
(→Make SD card on Windows system) |
||
| Line 28: | Line 28: | ||
#: dd bs=4M if=2014-09-09-wheezy-raspbian.img of=/dev/mmcblk0 | #: dd bs=4M if=2014-09-09-wheezy-raspbian.img of=/dev/mmcblk0 | ||
| − | === | + | ===Windows - Transfer Pi Image to micro SD card=== |
raspberrypi.org recommends using: | raspberrypi.org recommends using: | ||
| − | http://sourceforge.net/projects/win32diskimager/ | + | http://sourceforge.net/projects/win32diskimager/ <br> |
| − | + | '''Proceed with caution''', an incorrect setting could corrupt your PC or attached storage. <br> | |
Detailed instructions: http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Windows | Detailed instructions: http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Windows | ||
#REMOVE any other USB memory devices from your computer. | #REMOVE any other USB memory devices from your computer. | ||
| − | #Plug | + | #Plug micro SD Card in adapter, confirm device letter using Windows Explorer. |
#Start Win32DiskImager | #Start Win32DiskImager | ||
#Browse to source file (image in downloads directory) | #Browse to source file (image in downloads directory) | ||
| − | #Check MD5 hash (0c1f26195db2f1a158bd88e95448fedb) | + | #Make absolutely sure the drive letter (destination) to right of source file is the SD card |
| − | #Click on Write | + | #Check MD5 hash (0c1f26195db2f1a158bd88e95448fedb) this takes a few minutes |
| + | #Click on Write, this takes a few more minutes | ||
#Confirm successful write then exit | #Confirm successful write then exit | ||
#The SD card image is called "boot" 25 files now visible in Windows explorer | #The SD card image is called "boot" 25 files now visible in Windows explorer | ||
Revision as of 01:13, 3 March 2016
Contents
Download Image
Download latest image currently hivetool073.zip rev. 0.7.3 as of 2-3-2016.
Caution this zipped image file is large at 1,894,183 megabytes.
https://drive.google.com/open?id=0B_3xqxGS2psWN1hTSmk5SldJSms
Calculate MD5 sum of zipped image
f1618e26ff1b03dfc2fae722e537b6d2 hivetool073.zip
Linux
md5sum hivetool073.zip
Windows
FCIV -md5 hivetool073.zip
Unzip
Copy the image to the SD card
Make micro SD card on Unix/Linux system
Recommend 16 gig with 48 mbps or better Detailed instructions: http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Linux_.28including_on_a_Pi.21.29
- Determine the device for the card reader (/dev/mmcblk0 on my laptop).
- Copy the image to the SD card:
- dd bs=4M if=2014-09-09-wheezy-raspbian.img of=/dev/mmcblk0
Windows - Transfer Pi Image to micro SD card
raspberrypi.org recommends using:
http://sourceforge.net/projects/win32diskimager/
Proceed with caution, an incorrect setting could corrupt your PC or attached storage.
Detailed instructions: http://elinux.org/RPi_Easy_SD_Card_Setup#Flashing_the_SD_Card_using_Windows
- REMOVE any other USB memory devices from your computer.
- Plug micro SD Card in adapter, confirm device letter using Windows Explorer.
- Start Win32DiskImager
- Browse to source file (image in downloads directory)
- Make absolutely sure the drive letter (destination) to right of source file is the SD card
- Check MD5 hash (0c1f26195db2f1a158bd88e95448fedb) this takes a few minutes
- Click on Write, this takes a few more minutes
- Confirm successful write then exit
- The SD card image is called "boot" 25 files now visible in Windows explorer
- Windows will report 40 megabytes free space on the SD card
You are now ready to eject micro SD card and place into the Pi
Windows - Setup Pi Operating System
- Install micro SD card into bare Pi, power up with Ethernet or for (non windows use local terminal)
- If using Ethernet determine IP address by viewing latest entry in access point
- Identify IP in the DHCP table named "raspberrypi"
- On a Windows PC setup a new remote desktop connection (RDP), enter target IP address of Pi
- If the Pi is found you will be prompted to enter the default user "pi" and password "raspberry"
- Leave the default module as "sesmon-Xvnc"
- Once connected you will see the Pi desktop, menu to "preferences"sub "raspberry pi configuration"
- Under "localisation" tab set your timezone
- Under system tab "expand file system", then OK then reboot from main menu last item
- Reestablish remote desktop connection using saved Windows settings
- Plug in WiFi dongle, configure WiFi authentication on desktop, top RH corner, dual monitors icon
- If WiFi connects, a signal strength indicator will replace the monitors icon
You are now ready to configure Hivetool.
