Difference between revisions of "Interface the HX711 to Pi"
| Line 9: | Line 9: | ||
<br clear=all> | <br clear=all> | ||
| − | |||
| − | |||
| − | |||
<br clear=all> | <br clear=all> | ||
| Line 19: | Line 16: | ||
===Method 1: Connect HX711 to P1/J8=== | ===Method 1: Connect HX711 to P1/J8=== | ||
[[File:Hx711 pi1.jpg|thumb|600px|HX711 with screw terminals and metal shield installed connected to P1/J8 on the Pi.]] | [[File:Hx711 pi1.jpg|thumb|600px|HX711 with screw terminals and metal shield installed connected to P1/J8 on the Pi.]] | ||
| − | |||
[[File:Hx711 pi2.jpg|thumb|600px|P1/J8 close up]] | [[File:Hx711 pi2.jpg|thumb|600px|P1/J8 close up]] | ||
This will work with all models of the Pi: A, B, A+, B+. | This will work with all models of the Pi: A, B, A+, B+. | ||
| + | |||
| + | ====Prepare the HX711 board==== | ||
| + | |||
| + | First prepare the HX711 board [[Solder shield and connectors|by soldering the shield and connectors]]. | ||
| Line 64: | Line 64: | ||
[[File:Hx711a.jpg|thumb|right|600px|DCT Electronic HX711 board plugged into P5]] | [[File:Hx711a.jpg|thumb|right|600px|DCT Electronic HX711 board plugged into P5]] | ||
| − | You will need a 1x4 female header ([http://www.amazon.com/Gino-2-54mm-Straight-Single-Headers/dp/B00899WQ6U/ref=sr_1_1?s=electronics&ie=UTF8&qid=1397881924&sr=1-1&keywords=headers 2.54mm Pitch Straight Single Row PCB Female Pin Headers]) and | + | You will need a 1x4 female header ([http://www.amazon.com/Gino-2-54mm-Straight-Single-Headers/dp/B00899WQ6U/ref=sr_1_1?s=electronics&ie=UTF8&qid=1397881924&sr=1-1&keywords=headers 2.54mm Pitch Straight Single Row PCB Female Pin Headers]) and load cells. |
#Order the board for $6.99 on [http://www.ebay.com/itm/Weighing-Sensor-AD-Module-Dual-channel-24-bit-a-d-Conversion-HX711-Shieding-/400460838550 Ebay]<br>[http://www.ebay.com/itm/HX711-Weighing-Sensor-Dual-Channel-24-Bit-Precision-A-D-Module-Pressure-Sensor-/161264280835?pt=LH_DefaultDomain_0&hash=item258c19a503 This one] for $2.17 should work, too. | #Order the board for $6.99 on [http://www.ebay.com/itm/Weighing-Sensor-AD-Module-Dual-channel-24-bit-a-d-Conversion-HX711-Shieding-/400460838550 Ebay]<br>[http://www.ebay.com/itm/HX711-Weighing-Sensor-Dual-Channel-24-Bit-Precision-A-D-Module-Pressure-Sensor-/161264280835?pt=LH_DefaultDomain_0&hash=item258c19a503 This one] for $2.17 should work, too. | ||
Revision as of 02:59, 29 December 2014
Building a Raspberry based electronic scale using the DCT Electronic HX711 board is as easy as Pi!
The DCT board comes with a metal shield and two sets of male headers: straight and right angle.
Contents
Required Parts
There are several HX711 boards available. We have been testing the brown boards that have a metal shield. There appear to be two versions of those available. Some only have one chip, some have two.
Installation
Method 1: Connect HX711 to P1/J8
This will work with all models of the Pi: A, B, A+, B+.
Prepare the HX711 board
First prepare the HX711 board by soldering the shield and connectors.
Pins 2, 16, 18, 20 on P1 (Model A and B) or J8 (Model A+ and B+)are used:
| P1/J8 | Pi | HX711 | Color |
|---|---|---|---|
| Pin 2 | +5 | Vcc | Red |
| Pin 16 | GPIO28 | DO/RX | White |
| Pin 18 | GPIO30 | CK/TX | Green |
| Pin 20 | Ground | GND | Black |
#define CLOCK_PIN 24 #define DATA_PIN 23
Method 2: Connect HX711 to P5
You will need a 1x4 female header (2.54mm Pitch Straight Single Row PCB Female Pin Headers) and load cells.
- Order the board for $6.99 on Ebay
This one for $2.17 should work, too. - Download the software from gitHub
git clone https://github.com/ggurov/hx711 - Solder a 1x4 straight female header in P5 on Pi (bottom side of board) and a 1x4 male header on the DCT board
- Solder the load cells to the DCT board.
- Plug the DTC board into the Pi.
- Change the GPIO pins in hx711.c from 30 and 31 to 28 and 30. This way they are all on one side of P5:
| P5 | Pi | HX711 |
|---|---|---|
| P5-1 | +5 | Vcc |
| P5-3 | GPIO28 | DO/RX |
| P5-5 | GPIO30 | CK/TX |
| P5-7 | Ground | GND |
#define CLOCK_PIN 30 #define DATA_PIN 28
Testing and Calibration
Temperature Compensation
Temperature Sensitivity
From the CZL635 Spec Sheet link below:
Temperature Effect on Span 2.5 g/°C
Temperature Effect on Zero 5 g/°C
From the CZL602X Spec Sheet link below:
Temperature Effect on Span 0.02%F.S/10℃
Temperature Effect on Zero 0.03%F.S/10℃
Full Scale = 50 kg
.02% F.S/10℃
.0002 * 50 kg = .01 kg / 10℃
= .001 kg / 1℃
= 1 g/ 1℃
So the CZL602X are 2.5 times more stable than the CZL635
HX711 Spec Sheets
http://hivetool.org/w/images/d/d2/Hx711_english.pdf
